v2.10.3

What's Changed in v2.10.3

• FIX: Increased MTX_WRITEQUEUESIZE to prevent issues with higher bitrates.
• FIX: Restart RTMP livestream on fail (#1333)
• FIX: Restore user data on bridge restart (#1334)
• NEW: SNAPSHOT_KEEP Option to delete old snapshots when saving snapshots with a timelapse-like custom format with SNAPSHOT_FORMAT. (#1330)
  • Example for 3 min: SNAPSHOT_KEEP=180, SNAPSHOT_KEEP=180s, SNAPSHOT_KEEP=3m
  • Example for 3 days: SNAPSHOT_KEEP=72h, SNAPSHOT_KEEP=3d
  • Example for 3 weeks: SNAPSHOT_KEEP=21d, SNAPSHOT_KEEP=3w
• NEW: RESTREAMIO option for livestreaming via restream.io. (#1333)
  • Example RESTREAMIO_FRONT_DOOR=re_My_Custom_Key123

v2.10.2

What's Changed in v2.10.2

• FIX: day/night FPS slowdown for V4 cameras (#1287) Thanks @cdoolin and @Answer-1!
• NEW: Update battery level in WebUI

v2.10.1

What's Changed in v2.10.0/v2.10.1

FIXED: Could not disable WB_AUTH if WB_API is set. Thanks @bengthu! (#1304)

WebUI Authentication

Simplify default credentials for the WebUI:

• This will not affect users who are setting their own WB_PASSWORD and WB_API.
• Default WB_PASSWORD will now be derived from the username part of the Wyze email address instead of using a randomly generated password.
  • Example: For the email address [email protected], the WB_PASSWORD will be john123.
• Default WB_API will be based on the wyze account for persistance.

Stream Authentication

NEW: STREAM_AUTH option to specify multiple users and paths:

• Username and password should be separated by a :
• An additional : can be used to specify the allowed IP address for the user.
  • This does NOT work with docker desktop
  • Specify multiple IPs using a comma
• Use the @ to specify paths accessible to the user.
  • Paths are optional for each user.
  • Multiple paths can be specified by using a comma. If none are provided, the user will have access to all paths/streams
• Multiple users can be specified by using | as a separator

EXAMPLE:

STREAM_AUTH=user:pass@cam-1,other-cam|second-user:password@just-one-cam|user3:pass

• user:pass has access to cam-1 and other-cam
• second-user:password has access to just-one-cam
• user3:pass has access to all paths/cameras

See Wiki for more information and examples.

Recording via MediaMTX

Recoding streams has been updated to use MediaMTX with the option to delete older clips.

Use RECORD_ALL or RECORD_CAM_NAME to enable recording.

• RECORD_PATH Available variables are %path or {cam_name}, %Y %m %d %H %M %S %f %s (time in strftime format).
• RECORD_LENGTH Length of each clip. Use s for seconds , h for hours. Defaults to 60s
• RECORD_KEEP Delete older clips. Use s for seconds , h for hours. Set to 0s to disable automatic deletion. Defaults to 0s

v2.10.0

What's Changed in v2.10.0

WebUI Authentication

Simplify default credentials for the WebUI:

• This will not affect users who are setting their own WB_PASSWORD and WB_API.
• Default WB_PASSWORD will now be derived from the username part of the Wyze email address instead of using a randomly generated password.
  • Example: For the email address [email protected], the WB_PASSWORD will be john123.
• Default WB_API will be based on the wyze account for persistance.

Stream Authentication

NEW: STREAM_AUTH option to specify multiple users and paths:

• Username and password should be separated by a :
• An additional : can be used to specify the allowed IP address for the user.
  • This does NOT work with docker desktop
  • Specify multiple IPs using a comma
• Use the @ to specify paths accessible to the user.
  • Paths are optional for each user.
  • Multiple paths can be specified by using a comma. If none are provided, the user will have access to all paths/streams
• Multiple users can be specified by using | as a separator

EXAMPLE:

STREAM_AUTH=user:pass@cam-1,other-cam|second-user:password@just-one-cam|user3:pass

• user:pass has access to cam-1 and other-cam
• second-user:password has access to just-one-cam
• user3:pass has access to all paths/cameras

See Wiki for more information and examples.

Recording via MediaMTX

Recoding streams has been updated to use MediaMTX with the option to delete older clips.

Use RECORD_ALL or RECORD_CAM_NAME to enable recording.

• RECORD_PATH Available variables are %path or {cam_name}, %Y %m %d %H %M %S %f %s (time in strftime format).
• RECORD_LENGTH Length of each clip. Use s for seconds , h for hours. Defaults to 60s
• RECORD_KEEP Delete older clips. Use s for seconds , h for hours. Set to 0s to disable automatic deletion. Defaults to 0s

v2.9.12

What's Changed in v2.9.11/12

• FIX: regression introduced in v2.9.11 which caused connection issues for WYZEDB3, WVOD1, HL_WCO2, and WYZEC1 (#1294)
• FIX: Update stream state on startup to prevent multiple connections.
• FIX: No audio on HW and QSV builds. (#1281)
• Use k10056 if supported and not setting fps when updating resolution and bitrate (#1194)
• Temporary fix: Don't check bitrate on newer firmware which do not seem to report the actual bitrate. (#1194)

v2.9.10

What's Changed in v2.9.10

• FIX: -20021 error when sending multiple ioctl commands to the camera.
• FIX: Regression introduced in v2.9.9 where the WebRTC/HLS icon in WebUI was missing.
• Reduced memory usage slightly.
• NEW: Option to use pre-hashed passwords (#1275):
  • You must md5 hash your password three times and prefix it with hashed:
  • Example: WYZE_PASSWORD=hashed:<your-tripple-hashed-password>
• NEW: REST/MQTT commands (#1274):
  • notifications GET/SET wyze app push notifications on/off (CLOUD).
  • motion_detection GET/SET motion detection on/off (LOCAL).

v2.9.9

What's Changed in v2.9.9

• FIX: Regression introduced in v2.9.8 where a pipe blocking issue would cause CPU to spike (#1268) (#1270)
• Tweak HLS latency and buffer.

v2.9.8

What's Changed in v2.9.8

KNOWN BUG: stream path may become unresponsive after stopping when ON_DEMAND is enabled until the onDemand timeout clears (60s).

• FIX: restart options in the WebUI
• FIX: Resume HLS/WebRTC on recover and play on first click in WebUI.
• NEW: Add 'reload cameras' option to refresh camera data without clearing all data (#1255)
• CHANGED: Use hls-js for HLS in WebUI.

v2.9.7

What's Changed in v2.9.7

• FIX: Pan and tilt cruise points 3 and 4 were broken. Thanks @Deach01! (#1228)
• FIX: Remove whitespaces from credentials (#1252)
• CHANGED: Removed blank option when setting cruise_points as it would be ignored anyways.

v2.9.6

What's Changed in v2.9.6

• FIX: Connection to camera would get stuck and not come back on it's own until the webui was opened. Thanks @vipergts450 and @g13092! (#1234) (#1240)
• FIX: Regression introduced in v2.9.5 where AAC audio sources would not work (#1241) Thanks @rspierenburg!
• Home Assistant FIX: Regression introduced in v2.9.5 where MQTT was not setting up automatically. (#1247)
• Home Assistant FIX: check if path exists when migrating HA config (#1242)
• Home Assistant NEW: Disable MQTT by setting MQTT to false (#1232)
• NEW: Ability to read credentials from Docker Secrets. Thanks @cliaz! (#1244)
  • Supported variables: WYZE_EMAIL, WYZE_PASSWORD, API_ID,API_KEY, WB_USERNAME, WB_PASSWORD, and WB_API