Apache, PHP and VNC that is used both for regattastart and powercheck
Connect to your Raspberry Pi via SSH Clone this repo: git clone https://github.com/nrjphwe/central
Then do: cd central and then run the setup script by: ./central_install.sh
The shut down uses GPIO4, which is Pin 7 and pin 9 (ground)
The i2c connection uses pin 3 for SDA, and pin 5 for SCL The shut down uses GPIO4, which is Pin 7.
- Pin 2 5V power
- Pin 3 i2c SDA
- Pin 5 i2c SCL
- Pin 6 Ground
- Pin 7 GPIO4 used for shutdown
- Pin 9 Ground used for shutdown