doorbell-v3.0.33

3.0.33 - 2026-02-17

Change

• For snapshot, try first new ISAPI method, then fallback to SDK (villaVTO doesnt support SDK)
• Better ISAPI alarm handling for indoor stations
• No more backlog on first start/use of the add-on! If you guys dont see the events anymore you saw before, let me know!

doorbell-v3.0.31

3.0.31 - 2026-02-11

Fix

• Doorbell name failing when spaces are used
• Improve manual mqtt config for validation errors

doorbell-v3.0.30

3.0.30 - 2026-02-10

Changed/Added

• Updated requirements to offer new functionality!
• New image entity, take snapshot button updates the image entity
• Ring event also creates a snapshot automaticly
• Pressing the call status button manually also updates the call sensor entity
• No more timestamp on the snapshot image, since we are now using the image mqtt entity
• Added a backlight control mode for outdoor stations
• Add control_source_decoded card_user_id and unlock_type to attributes when door was opened
• Add dev number to logging on incoming ring event, to hopefull identify what button on outdoor station was pressed
• Fix for dev number, when not able to parse
• Improve offline device handling

doorbell-v3.0.27

3.0.27 - 2026-01-23

Changed

• Using a slim image now, makes the Add-on / image 5 x times smaller 1GB => 200MB
• Added: Extra input commands to align with all MQTT entities (callerInfo/callStatus/takeSnapshot)
• Added: An extra button (Take Snapshot), this takes a snapshot from the outdoor station and saves the image in the /media drive! (For now :-) ) When you are pressing the button from an indoor station, it will login to the outdoor station first, this works ONLY when the admin credentials are the same, could be usefull for people that only have access to indoor stations
• Fix: gracefully handle invalid ISAPI input strings

doorbell-v3.0.26

3.0.26- 2025-12-15

Changed

• Added also a call sensor for indoor stations, there is no event for indoor stations, so you need to manually poll it with the call_state_poll config option, usefull when you dont have access to outdoor station (appertment building)

doorbell-v3.0.25

3.0.25- 2025-11-12

Changed

• Put the call sensor back to idle after 60 sec, some devices dont have the "dismissed" event so sensor stays in "ringing" state
• COM ports on Indoor stations do now have the ability to also CLOSE instead of OPEN only
• Add support for DS-KIT6Q 10509
• Fix polling for scene / alarm mode when configured on multiple Indoor Stations
• Added an optional polling for the call state sensor, for devices running newer firmware 3.7.x, where ringing event is not in the SDK anymore, there is a new addon-config "call_state_poll", you can configure it with an integer to poll every xx seconds

doorbell-v3.0.24

Fix for: uses the deprecated option 'object_id' to set the default entity id.

doorbell-v3.0.23

Fix for: uses the deprecated option 'object_id' to set the default entity id.

doorbell-v3.0.22

3.0.22 - 2025-05-04

Changed

• Added date/time in the motion event

doorbell-v3.0.21

3.0.21 - 2025-04-01

Added

• Added support for DS-K1T341CMF and DS-K1T6QT-F72M