[Telink] Add the functionality for the TLX module board

.github/workflows/examples-telink.yaml

@@ -316,6 +316,20 @@ jobs:
             - name: clean out build output
               run: rm -rf ./out
 
+            - name: Build example Telink (tl7218x ml7g) Lighting App
+              # Run test for master and s07641069 PRs
+              if: github.event.pull_request.number == null || github.event.pull_request.head.repo.full_name == 's07641069/connectedhomeip'
+              run: |
+                  ./scripts/run_in_build_env.sh \
+                    "./scripts/build/build_examples.py --target 'telink-tl7218x-ml7g' build"
+                  .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
+                    telink tl7218x_ml7g lighting-app \
+                    out/telink-tl7218x_ml7g-lighting-app/zephyr/zephyr.elf \
+                    /tmp/bloat_reports/
+
+            - name: clean out build output
+              run: rm -rf ./out
+
             - name: Build example Telink (B91) Thermostat App
               # Run test for master and s07641069 PRs
               if: github.event.pull_request.number == null || github.event.pull_request.head.repo.full_name == 's07641069/connectedhomeip'

examples/platform/telink/common.cmake

@@ -65,6 +65,38 @@ else()
   unset(MARS_CONF_OVERLAY_FILE)
 endif()
 
+if(${TLNK_7218X_ML7G_BOARD} MATCHES y)
+  set(ML_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${BOARD}_ml7g.overlay")
+  if(NOT EXISTS "${ML_DTC_OVERLAY_FILE}")
+    message(FATAL_ERROR "${ML_DTC_OVERLAY_FILE} doesn't exist")
+  endif()
+  set(ML_CONF_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${BOARD}_ml7g.conf")
+  if(NOT EXISTS "${ML_CONF_OVERLAY_FILE}")
+    message(FATAL_ERROR "${ML_CONF_OVERLAY_FILE} doesn't exist")
+  endif()
+elseif(${TLNK_7218X_ML7M_BOARD} MATCHES y)
+  set(ML_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${BOARD}_ml7m.overlay")
+  if(NOT EXISTS "${ML_DTC_OVERLAY_FILE}")
+    message(FATAL_ERROR "${ML_DTC_OVERLAY_FILE} doesn't exist")
+  endif()
+  set(ML_CONF_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${BOARD}_ml7m.conf")
+  if(NOT EXISTS "${ML_CONF_OVERLAY_FILE}")
+    message(FATAL_ERROR "${ML_CONF_OVERLAY_FILE} doesn't exist")
+  endif() 
+elseif(${TLNK_3218X_ML3M_BOARD} MATCHES y)
+  set(ML_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${BOARD}_ml3m.overlay")
+  if(NOT EXISTS "${ML_DTC_OVERLAY_FILE}")
+    message(FATAL_ERROR "${ML_DTC_OVERLAY_FILE} doesn't exist")
+  endif()
+  set(ML_CONF_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${BOARD}_ml3m.conf")
+  if(NOT EXISTS "${ML_CONF_OVERLAY_FILE}")
+    message(FATAL_ERROR "${ML_CONF_OVERLAY_FILE} doesn't exist")
+  endif() 
+else()
+  unset(ML_DTC_OVERLAY_FILE)
+  unset(ML_CONF_OVERLAY_FILE)
+endif()
+
 if(${TLNK_USB_DONGLE} MATCHES y)
   set(USB_BOOT_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${BASE_BOARD}_usb_boot.overlay")
   if(NOT EXISTS "${USB_BOOT_DTC_OVERLAY_FILE}")
@@ -130,15 +162,15 @@ endif()
 
 if(DTC_OVERLAY_FILE)
   set(DTC_OVERLAY_FILE
-    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${USB_DTC_OVERLAY_FILE} ${MARS_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
+    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${USB_DTC_OVERLAY_FILE} ${MARS_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE} ${ML_DTC_OVERLAY_FILE}"
     CACHE STRING "" FORCE
   )
 else()
-  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${USB_DTC_OVERLAY_FILE} ${MARS_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
+  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${USB_DTC_OVERLAY_FILE} ${MARS_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE} ${ML_DTC_OVERLAY_FILE})
 endif()
 
 if(NOT CONF_FILE)
-  set(CONF_FILE ${USB_CONF_OVERLAY_FILE} ${MARS_CONF_OVERLAY_FILE} ${ZEPHYR_VERSION_OVERLAY_FILE} prj.conf)
+  set(CONF_FILE ${USB_CONF_OVERLAY_FILE} ${MARS_CONF_OVERLAY_FILE} prj.conf ${ML_CONF_OVERLAY_FILE})
 endif()
 
 # Load NCS/Zephyr build system

scripts/build/build/targets.py

@@ -818,6 +818,7 @@ def BuildTelinkTarget():
     target.AppendModifier('factory-data', enable_factory_data=True)
     target.AppendModifier('4mb', enable_4mb_flash=True)
     target.AppendModifier('mars', mars_board_config=True)
+    target.AppendModifier('tl7218x_ml7g', tl7218x_ml7g_board_config=True)
     target.AppendModifier('usb', usb_board_config=True)
     target.AppendModifier('compress-lzma', compress_lzma_config=True)
     target.AppendModifier('thread-analyzer', thread_analyzer_config=True)

scripts/build/builders/telink.py

@@ -159,6 +159,7 @@ def __init__(self,
                  enable_factory_data: bool = False,
                  enable_4mb_flash: bool = False,
                  mars_board_config: bool = False,
+                 tl7218x_ml7g_board_config: bool = False,
                  usb_board_config: bool = False,
                  compress_lzma_config: bool = False,
                  thread_analyzer_config: bool = False,
@@ -174,6 +175,7 @@ def __init__(self,
         self.enable_factory_data = enable_factory_data
         self.enable_4mb_flash = enable_4mb_flash
         self.mars_board_config = mars_board_config
+        self.tl7218x_ml7g_board_config = tl7218x_ml7g_board_config
         self.usb_board_config = usb_board_config
         self.compress_lzma_config = compress_lzma_config
         self.thread_analyzer_config = thread_analyzer_config
@@ -219,6 +221,9 @@ def generate(self):
         if self.mars_board_config:
             flags.append("-DTLNK_MARS_BOARD=y")
 
+        if self.tl7218x_ml7g_board_config:
+            flags.append("-DTLNK_7218X_ML7G_BOARD=y")
+
         if self.usb_board_config:
             flags.append("-DTLNK_USB_DONGLE=y")
 

scripts/build/testdata/all_targets_linux_x64.txt

@@ -23,5 +23,5 @@ qpg-qpg6105-{light,light-switch,lock,persistent-storage,shell,thermostat}[-updat
 realtek-rtl8777g-{all-clusters,light-switch,lighting,lock,ota-requestor,thermostat,window}
 stm32-stm32wb5mm-dk-light
 tizen-{arm,arm64}-{all-clusters,chip-tool,light,tests}[-asan][-coverage][-no-ble][-no-thread][-no-wifi][-ubsan][-with-ui]
-telink-{tl3218x,tl3218x_retention,tl7218x,tl7218x_retention,tlsr9118bdk40d,tlsr9518adk80d,tlsr9528a,tlsr9528a_retention}-{air-quality-sensor,all-clusters,all-clusters-minimal,bridge,contact-sensor,light,light-switch,lock,ota-requestor,pump,pump-controller,shell,smoke-co-alarm,temperature-measurement,thermostat,window-covering}[-4mb][-compress-lzma][-dfu][-factory-data][-mars][-ota][-precompiled-ot][-rpc][-shell][-thread-analyzer][-usb]
+telink-{tl3218x,tl3218x_retention,tl7218x,tl7218x_retention,tl7218x_ml7g,tlsr9118bdk40d,tlsr9518adk80d,tlsr9528a,tlsr9528a_retention}-{air-quality-sensor,all-clusters,all-clusters-minimal,bridge,contact-sensor,light,light-switch,lock,ota-requestor,pump,pump-controller,shell,smoke-co-alarm,temperature-measurement,thermostat,window-covering}[-4mb][-compress-lzma][-dfu][-factory-data][-mars][-ota][-precompiled-ot][-rpc][-shell][-thread-analyzer][-usb][-tl7218x_ml7g]
 openiotsdk-{lock,shell}[-mbedtls][-psa]

src/platform/telink/tl3218x_ml3m.conf

@@ -0,0 +1,6 @@
+CONFIG_CHIP_BUTTON_MANAGER_IRQ_MODE=y
+
+# USB configuration (Disable it if need full logging)
+CONFIG_USB_DEVICE_STACK=y
+CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=n
+CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF=y

src/platform/telink/tl3218x_ml3m.overlay

@@ -0,0 +1,140 @@
+
+/ {
+	model = "telink,tl321x";
+	compatible = "telink,tl3218x";
+
+	chosen {
+		zephyr,console = &cdc_acm_uart0;
+		zephyr,shell-uart = &cdc_acm_uart0;
+	};
+
+    aliases {
+        /delete-property/ mcuboot-button0;
+		pwm-led0 = &pwm_led_white;
+		pwm-0 = &pwm0;
+    };
+
+    leds {
+        compatible = "gpio-leds";
+
+		led_white: led_0 {
+            gpios = <&gpioe 5 GPIO_ACTIVE_HIGH>;
+            label = "LED White";
+        };
+
+		led_green: led_1 {
+            gpios = <&gpioe 4 GPIO_ACTIVE_HIGH>;
+            label = "LED Green";
+        };
+
+    };
+
+	/delete-node/ pwm_leds;
+
+	pwm_leds {
+		compatible = "pwm-leds";
+
+		pwm_led_white: pwm_led_0 {
+			pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_NORMAL>;
+			label = "PWM LED White";
+		};
+	};
+
+    keys {
+        compatible = "gpio-keys";
+
+        key_1: button_1 {
+            label = "User KEY1";
+            gpios = <&gpioe 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+        };
+
+        key_2: button_2 {
+            label = "User KEY2";
+            gpios = <&gpioe 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+        };
+
+        key_3: button_3 {
+            label = "User KEY3";
+            gpios = <&gpioa 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+        };
+
+        key_4: button_4 {
+            label = "User KEY4";
+            gpios = <&gpioa 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+        };
+
+    };
+
+    /* Short TL_Key3 (J6 pin 31) to ground */
+	key_pool {
+		compatible = "gpio-keys";
+
+		inp {
+			gpios = <&gpioe 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>,
+				<&gpioe 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+
+    led_pool {
+		compatible = "gpio-leds";
+
+		out {
+			gpios = <&gpioe 4 GPIO_ACTIVE_HIGH>,
+                    <&gpioe 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pwm_pool {
+		compatible = "pwm-leds";
+		out {
+			pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_NORMAL>,
+				<&pwm0 1 PWM_MSEC(20) PWM_POLARITY_NORMAL>,
+				<&pwm0 2 PWM_MSEC(20) PWM_POLARITY_NORMAL>,
+				<&pwm0 3 PWM_MSEC(20) PWM_POLARITY_NORMAL>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	current-speed = <115200>;
+	pinctrl-0 = <&uart0_tx_pb6_default &uart0_rx_pb7_default>;
+	pinctrl-names = "default";
+};
+
+&pwm0 {
+	status = "okay";
+	clock-frequency = <300000>;
+	pinctrl-ch3 = <&pwm_ch3_pe5_default>;
+};
+
+&pinctrl {
+	/* Set pad-mul-sel register value.
+	 * Note: Pins functions below (pinmux = <...>) depend on this value.
+	 */
+	pad-mul-sel = <1>;
+
+	/* UART0: TX(PB6), RX(PB7) */
+
+	uart0_tx_pb6_default: uart0_tx_pb6_default {
+		pinmux = <TLX_PINMUX_SET(TLX_PORT_B, TLX_PIN_6,
+			(TL321X_FUNC_UART0_TX | TLX_PULL_UP))>;
+	};
+	uart0_rx_pb7_default: uart0_rx_pb7_default {
+		pinmux = <TLX_PINMUX_SET(TLX_PORT_B, TLX_PIN_7,
+			(TL321X_FUNC_UART0_RTX_IO | TLX_PULL_UP))>;
+	};
+
+	/* PWM Channel 3 (PE5) */
+	pwm_ch3_pe5_default: pwm_ch3_pe5_default {
+		pinmux = <TLX_PINMUX_SET(TLX_PORT_E, TLX_PIN_5, TL321X_FUNC_PWM3)>;
+	};
+
+};
+
+/* USB configuration (Disable it if need full logging) */
+&zephyr_udc0 {
+	cdc_acm_uart0: cdc_acm_uart0 {
+		compatible = "zephyr,cdc-acm-uart";
+	};
+};

src/platform/telink/tl7218x_ml7g.conf

@@ -0,0 +1,9 @@
+CONFIG_CHIP_BUTTON_MANAGER_IRQ_MODE=y
+
+# Disable PWM because PE1~5 are used for PWM
+CONFIG_PWM=n
+
+# USB configuration (Disable it if need full logging)
+CONFIG_USB_DEVICE_STACK=y
+CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=n
+CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF=y

src/platform/telink/tl7218x_ml7g.overlay

@@ -0,0 +1,119 @@
+
+/ {
+	model = "telink,tl721x";
+	compatible = "telink,tl7218x";
+
+	chosen {
+		zephyr,console = &cdc_acm_uart0;
+		zephyr,shell-uart = &cdc_acm_uart0;
+	};
+
+    aliases {
+        /delete-property/ mcuboot-button0;
+    };
+
+    leds {
+        compatible = "gpio-leds";
+
+		led_green: led_1 {
+            gpios = <&gpioe 2 GPIO_ACTIVE_HIGH>;
+            label = "LED Green";
+        };
+
+        led_white: led_2 {
+            gpios = <&gpioe 1 GPIO_ACTIVE_HIGH>;
+            label = "LED White";
+        };
+    };
+
+    keys {
+        compatible = "gpio-keys";
+
+        key_1: button_1 {
+            label = "User KEY1";
+            gpios = <&gpioe 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+        };
+
+        key_2: button_2 {
+            label = "User KEY2";
+            gpios = <&gpioe 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+        };
+
+        key_3: button_3 {
+            label = "User KEY3";
+            gpios = <&gpiof 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+        };
+
+        key_4: button_4 {
+            label = "User KEY4";
+            gpios = <&gpioa 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+        };
+
+    };
+
+    /* Short TL_Key3 (J6 pin 31) to ground */
+	key_pool {
+		compatible = "gpio-keys";
+
+		inp {
+			gpios = <&gpioe 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>,
+				<&gpioe 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+
+    led_pool {
+		compatible = "gpio-leds";
+
+		out {
+			gpios = <&gpioe 2 GPIO_ACTIVE_HIGH>,
+                    <&gpioe 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+    /delete-node/ pwm_pool;
+
+};
+
+
+&gpioe {
+	interrupts = <39 1>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+	current-speed = <115200>;
+	pinctrl-0 = <&uart0_tx_pf1_default &uart0_rx_pf2_default>;
+	pinctrl-names = "default";
+};
+
+/* Disable LSPI in overlay */
+&lspi {
+    status = "disabled";
+};
+
+&pinctrl {
+	/* Set pad-mul-sel register value.
+	 * Note: Pins functions below (pinmux = <...>) depend on this value.
+	 */
+	pad-mul-sel = <1>;
+
+	/* UART0: TX(PF1), RX(PF2), RTS(PB4), CTS(PB6) */
+
+	uart0_tx_pf1_default: uart0_tx_pf1_default {
+		pinmux = <TLX_PINMUX_SET(TLX_PORT_F, TLX_PIN_1,
+			(TL721X_FUNC_UART0_TX | TL721X_PULL_UP))>;
+	};
+	uart0_rx_pf2_default: uart0_rx_pf2_default {
+		pinmux = <TLX_PINMUX_SET(TLX_PORT_F, TLX_PIN_2,
+			(TL721X_FUNC_UART0_RTX_IO | TL721X_PULL_UP))>;
+	};
+
+};
+
+/* USB configuration (Disable it if need full logging) */
+&zephyr_udc0 {
+	cdc_acm_uart0: cdc_acm_uart0 {
+		compatible = "zephyr,cdc-acm-uart";
+	};
+};