Support Jet pack 6.2

.github/workflows/build-jp6.1.yml

@@ -0,0 +1,25 @@
+name: Build JP 6.1
+
+on:
+  push:
+    branches:
+    - master
+    - dev
+  pull_request:
+    branches: ['**']
+
+permissions: read-all
+
+jobs:
+  build:
+
+    runs-on: ubuntu-latest
+
+    steps:
+    - uses: actions/checkout@f43a0e5ff2bd294095638e18286ca9a3d1956744 #v3
+    - name: setup workspace
+      run: yes | ./setup_workspace.sh 6.1
+    - name: apply patches
+      run: git config --global user.email "builder@example.com" && git config --global user.name "builder" && ./apply_patches.sh apply 6.1
+    - name: build
+      run: ./build_all.sh 6.1

.github/workflows/build-jp6.2.yml

@@ -0,0 +1,25 @@
+name: Build JP 6.2
+
+on:
+  push:
+    branches:
+    - master
+    - dev
+  pull_request:
+    branches: ['**']
+
+permissions: read-all
+
+jobs:
+  build:
+
+    runs-on: ubuntu-latest
+
+    steps:
+    - uses: actions/checkout@f43a0e5ff2bd294095638e18286ca9a3d1956744 #v3
+    - name: setup workspace
+      run: yes | ./setup_workspace.sh 6.2
+    - name: apply patches
+      run: git config --global user.email "builder@example.com" && git config --global user.name "builder" && ./apply_patches.sh apply 6.2
+    - name: build
+      run: ./build_all.sh 6.2

README.md

@@ -3,7 +3,7 @@
 # D457 MIPI on NVIDIA® Jetson AGX Xavier™ and AGX Orin™
 The RealSense™ MIPI platform driver enables the user to control and stream RealSense™ 3D MIPI cameras.
 The system shall include:
-* NVIDIA® Jetson platform (Currently Supported JetPack versions are: 6.0, 5.1.2, 5.0.2, 4.6.1)
+* NVIDIA® Jetson platform (Currently Supported JetPack versions are: 6.2, 6.1, 6.0, 5.1.2, 5.0.2, 4.6.1)
 * RealSense De-Serialize board (https://store.intelrealsense.com/buy-intel-realsense-des457.html)
 * NVIDIA® Jetson AGX Orin™ Passive adapter board from [Leopard Imaging LI-JTX1-SUB-ADPT](https://leopardimaging.com/product/accessories/adapters-carrier-boards/for-nvidia-jetson/li-jtx1-sub-adpt/)
 * RS MIPI camera (e.g. https://store.intelrealsense.com/buy-intel-realsense-depth-camera-d457.html)
@@ -15,7 +15,7 @@ The system shall include:
 
 # Documentation
 
-- NVIDIA® Jetson AGX Orin™ board setup - AGX Orin™ [JetPack 6.0](./README_JP6.md) setup guide
+- NVIDIA® Jetson AGX Orin™ board setup - AGX Orin™ [JetPack 6.x](./README_JP6.md) setup guide
 - NVIDIA® Jetson AGX Xavier™ board setup - AGX Xavier™ [JetPack 5.x.2](./README_JP5.md) setup guide
 - NVIDIA® Jetson AGX Xavier™ board setup - AGX Xavier™ [JetPack 4.6.1](./README_JP4.md) setup guide
 - Build Tools manual page [Build Manual page](./README_tools.md)
@@ -29,9 +29,8 @@ Please follow the [instruction](https://docs.nvidia.com/sdk-manager/install-with
 
 # JetPack build
 
-- [JetPack 6.0](./README_JP6.md#build-environment-prerequisites)
-- [JetPack 5.1.2](./README_JP5.md#build-kernel-dtb-and-d457-driver)
-- [JetPack 5.0.2](./README_JP5.md#build-kernel-dtb-and-d457-driver)
+- [JetPack 6.x](./README_JP6.md#build-environment-prerequisites)
+- [JetPack 5.x.2](./README_JP5.md#build-kernel-dtb-and-d457-driver)
 - [JetPack 4.6.1](./README_JP4.md#build-kernel-dtb-and-d457-driver)
 
 ### Verify driver after installation

README_JP4.md

@@ -12,7 +12,7 @@ The system shall include:
 
 ### Links
 - Intel® RealSense™ camera driver for GMSL* interface [Front Page](./README.md)
-- Jetson AGX Orin™ board setup - AGX Orin™ [JetPack 6.0](./README_JP6.md) setup guide
+- Jetson AGX Orin™ board setup - AGX Orin™ [JetPack 6.x](./README_JP6.md) setup guide
 - Jetson AGX Xavier™ board setup - AGX Xavier™ [JetPack 5.x.2](./README_JP5.md) setup guide
 - Jetson AGX Xavier™ board setup - AGX Xavier™ [JetPack 4.6.1](./README_JP4.md) setup guide
 - Build Tools manual page [Build Manual page](./README_tools.md)
@@ -54,7 +54,7 @@ cd ../../..
 sudo apt install build-essential bc flex bison
 
 # apply patches
-./apply_patches_ext.sh ./Linux_for_Tegra/source/public 4.6.1
+./apply_patches_ext.sh 4.6.1 ./Linux_for_Tegra/source/public
 
 # remove BUILD_NUMBER env dependency kernel vermagic
 sed -i s/'UTS_RELEASE=\$(KERNELRELEASE)-ab\$(BUILD_NUMBER)'/'UTS_RELEASE=\$(KERNELRELEASE)'/g ./Linux_for_Tegra/source/public/kernel/kernel-4.9/Makefile
@@ -170,4 +170,4 @@ echo 1 | sudo tee /sys/bus/i2c/drivers/max9295/30-0040/refresh_setting
 echo 1 | sudo tee /sys/bus/i2c/drivers/max9296/30-0048/refresh_setting
 ```
 **NOTE**
-- It's recommended to save the original kernel image as backup boot option in `/boot/extlinux/extlinux.conf`.
+- It's recommended to save the original kernel image as backup boot option in `/boot/extlinux/extlinux.conf`.

README_JP5.md

@@ -12,7 +12,7 @@ The system shall include:
 
 ### Links
 - Intel® RealSense™ camera driver for GMSL* interface [Front Page](./README.md)
-- Jetson AGX Orin™ board setup - AGX Orin™ [JetPack 6.0](./README_JP6.md) setup guide
+- Jetson AGX Orin™ board setup - AGX Orin™ [JetPack 6.x](./README_JP6.md) setup guide
 - Jetson AGX Xavier™ board setup - AGX Xavier™ [JetPack 5.x.2](./README_JP5.md) setup guide
 - Jetson AGX Xavier™ board setup - AGX Xavier™ [JetPack 4.6.1](./README_JP4.md) setup guide
 - Build Tools manual page [Build Manual page](./README_tools.md)
@@ -37,8 +37,8 @@ Download Jetson Linux source code tarball from
 
 ## JetPack 5.1.2
 ```
-mkdir -p l4t-gcc/5.1.2
-cd ./l4t-gcc/5.1.2
+mkdir -p l4t-gcc/5.x
+cd ./l4t-gcc/5.x
 wget https://developer.nvidia.com/embedded/jetson-linux/bootlin-toolchain-gcc-93 -O aarch64--glibc--stable-final.tar.gz
 tar xf aarch64--glibc--stable-final.tar.gz
 cd ../..
@@ -49,8 +49,8 @@ tar xjf kernel_src.tbz2
 ```
 ## JetPack 5.0.2
 ```
-mkdir -p l4t-gcc/5.0.2
-cd ./l4t-gcc/5.0.2
+mkdir -p l4t-gcc/5.x
+cd ./l4t-gcc/5.x
 wget https://developer.nvidia.com/embedded/jetson-linux/bootlin-toolchain-gcc-93 -O aarch64--glibc--stable-final.tar.gz
 tar xf aarch64--glibc--stable-final.tar.gz --strip-components 1
 cd ../..
@@ -68,7 +68,7 @@ cd ../../..
 sudo apt install build-essential bc flex bison
 
 # apply patches
-./apply_patches_ext.sh ./Linux_for_Tegra/source/public 5.0.2
+./apply_patches_ext.sh 5.0.2 ./Linux_for_Tegra/source/public
 
 # build kernel, dtb and D457 driver
 ./build_all.sh 5.0.2 ./Linux_for_Tegra/source/public
@@ -108,21 +108,21 @@ Building with `build_all.sh`
 
 The necessary files are:
 
-- kernel image `images/<JetPack_version>/arch/arm64/boot/Image`
-- dtb `images/5.0.2/arch/arm64/boot/dts/nvidia/tegra194-p2888-0001-p2822-0000.dtb`
-- D457 driver `images/5.0.2/drivers/media/i2c/d4xx.ko`
-- UVC Video driver `images/5.0.2/drivers/media/usb/uvc/uvcvideo.ko`
-- V4L2 Core Video driver `images/5.0.2/drivers/media/v4l2-core/videobuf-core.ko`
-- V4L2 VMalloc Video driver `images/5.0.2/drivers/media/v4l2-core/videobuf-vmalloc.ko`
+- kernel image `images/5.x/arch/arm64/boot/Image`
+- dtb `images/5.x/arch/arm64/boot/dts/nvidia/tegra194-p2888-0001-p2822-0000.dtb`
+- D457 driver `images/5.x/drivers/media/i2c/d4xx.ko`
+- UVC Video driver `images/5.x/drivers/media/usb/uvc/uvcvideo.ko`
+- V4L2 Core Video driver `images/5.x/drivers/media/v4l2-core/videobuf-core.ko`
+- V4L2 VMalloc Video driver `images/5.x/drivers/media/v4l2-core/videobuf-vmalloc.ko`
 
 Copy build results from Host to Jetson target `10.0.0.116` user `nvidia`
 ```
-scp ./images/5.0.2/arch/arm64/boot/Image nvidia@10.0.0.116:~/
-scp ./images/5.0.2/arch/arm64/boot/dts/nvidia/tegra194-p2888-0001-p2822-0000.dtb nvidia@10.0.0.116:~/
-scp ./images/5.0.2/drivers/media/i2c/d4xx.ko nvidia@10.0.0.116:~/
-scp ./images/5.0.2/drivers/media/usb/uvc/uvcvideo.ko nvidia@10.0.0.116:~/
-scp ./images/5.0.2/drivers/media/v4l2-core/videobuf-core.ko nvidia@10.0.0.116:~/
-scp ./images/5.0.2/drivers/media/v4l2-core/videobuf-vmalloc.ko nvidia@10.0.0.116:~/
+scp ./images/5.x/arch/arm64/boot/Image nvidia@10.0.0.116:~/
+scp ./images/5.x/arch/arm64/boot/dts/nvidia/tegra194-p2888-0001-p2822-0000.dtb nvidia@10.0.0.116:~/
+scp ./images/5.x/drivers/media/i2c/d4xx.ko nvidia@10.0.0.116:~/
+scp ./images/5.x/drivers/media/usb/uvc/uvcvideo.ko nvidia@10.0.0.116:~/
+scp ./images/5.x/drivers/media/v4l2-core/videobuf-core.ko nvidia@10.0.0.116:~/
+scp ./images/5.x/drivers/media/v4l2-core/videobuf-vmalloc.ko nvidia@10.0.0.116:~/
 ```
 
 Copy them to the right places on Jetson target:

README_JP6.md

@@ -1,9 +1,12 @@
 # Intel® RealSense™ camera driver for GMSL* interface
 
-# D457 MIPI on NVIDIA® Jetson AGX Orin™ JetPack 6.0 
+# D457 MIPI on NVIDIA® Jetson AGX Orin™ JetPack 6.x 
 The Intel® RealSense™ MIPI platform driver enables the user to control and stream RealSense™ 3D MIPI cameras.
 The system shall include:
-* NVIDIA® Jetson™ platform Supported JetPack versions are: [6.0 production release](https://developer.nvidia.com/embedded/jetpack-sdk-60)
+* NVIDIA® Jetson™ platform Supported JetPack versions are:
+    - [6.2 production release](https://developer.nvidia.com/embedded/jetpack-sdk-62)
+    - [6.1 production release](https://developer.nvidia.com/embedded/jetpack-sdk-61)
+    - [6.0 production release](https://developer.nvidia.com/embedded/jetpack-sdk-60)
 * RealSense™ [De-Serialize board](https://store.intelrealsense.com/buy-intel-realsense-des457.html)
 * Jetson AGX Orin™ Passive adapter board from [Leopard Imaging® LI-JTX1-SUB-ADPT](https://leopardimaging.com/product/accessories/adapters-carrier-boards/for-nvidia-jetson/li-jtx1-sub-adpt/)
 * RS MIPI camera [D457](https://store.intelrealsense.com/buy-intel-realsense-depth-camera-d457.html)
@@ -15,7 +18,7 @@ The system shall include:
 
 ### Links
 - Intel® RealSense™ camera driver for GMSL* interface [Front Page](./README.md)
-- NVIDIA® Jetson AGX Orin™ board setup - AGX Orin™ [JetPack 6.0](./README_JP6.md) setup guide
+- NVIDIA® Jetson AGX Orin™ board setup - AGX Orin™ [JetPack 6.x](./README_JP6.md) setup guide
 - NVIDIA® Jetson AGX Xavier™ board setup - AGX Xavier™ [JetPack 5.x.2](./README_JP5.md) setup guide
 - NVIDIA® Jetson AGX Xavier™ board setup - AGX Xavier™ [JetPack 4.6.1](./README_JP4.md) setup guide
 - Build Tools manual page [Build Manual page](./README_tools.md)
@@ -43,69 +46,70 @@ sudo apt-get install -y build-essential bc wget flex bison curl libssl-dev xxd
 ```
 git clone https://github.com/IntelRealSense/realsense_mipi_platform_driver.git
 cd realsense_mipi_platform_driver
-./setup_workspace.sh 6.0
-./apply_patches.sh apply 6.0
-./build_all.sh 6.0
+./setup_workspace.sh 6.2
+./apply_patches.sh apply 6.2
+./build_all.sh 6.2
 ```
 Note: dev_dbg() log support will not be enabled by default. If needed, run the `./build_all.sh` script with `--dev-dbg` option like below.
 ```
-./build_all.sh --dev-dbg 6.0
+./build_all.sh --dev-dbg 6.2
 ```
 
 
 
 ## JetPack manual build - cross compile x86-64 (CI deploy)
 
-[NVIDIA® Jetson Linux 36.3](https://developer.nvidia.com/embedded/jetson-linux-r363)
-1. Download Jetson Linux Driver Package - [JetPack 6.0 BSP sources](https://developer.nvidia.com/downloads/embedded/l4t/r36_release_v3.0/release/jetson_linux_r36.3.0_aarch64.tbz2)
+[NVIDIA® JetPack 6.2: Jetson Linux 36.4.3](https://developer.nvidia.com/embedded/jetson-linux-r3643)
+1. Download Jetson Linux Driver Package - [JetPack 6.2 BSP sources](https://developer.nvidia.com/downloads/embedded/l4t/r36_release_v4.3/release/jetson_linux_r36.4.3_aarch64.tbz2)
 2. Download Toolchain ARM64 compiler - [Bootlin Toolchain gcc 11.3](https://developer.nvidia.com/downloads/embedded/l4t/r36_release_v3.0/toolchain/aarch64--glibc--stable-2022.08-1.tar.bz2)
 3. Apply patches for kernel drivers, nvidia-oot module and tegra devicetree.
 4. Build cross-compile project on host (Build PC).
 5. Apply build results to target (Jetson).
 6. Configure target.
 
 ```
-# JetPack 6.0
-mkdir -p l4t-gcc/6.0
-cd ./l4t-gcc/6.0
+# JetPack 6.2
+mkdir -p l4t-gcc/6.x
+cd ./l4t-gcc/6.x
 wget https://developer.nvidia.com/downloads/embedded/l4t/r36_release_v3.0/toolchain/aarch64--glibc--stable-2022.08-1.tar.bz2 -O aarch64--glibc--stable-final.tar.bz2
 tar xf aarch64--glibc--stable-final.tar.bz2 --strip-components 1
 cd ../..
-wget https://developer.nvidia.com/downloads/embedded/l4t/r36_release_v3.0/sources/public_sources.tbz2
+wget https://developer.nvidia.com/downloads/embedded/l4t/r36_release_v4.3/sources/public_sources.tbz2
 tar xjf public_sources.tbz2
 cd Linux_for_Tegra/source
 tar xjf kernel_src.tbz2
 tar xjf kernel_oot_modules_src.tbz2
 tar xjf nvidia_kernel_display_driver_source.tbz2
 cd ../..
 
-./apply_patches_ext.sh ./Linux_for_Tegra/source 6.0
+./apply_patches_ext.sh 6.2 Linux_for_Tegra/source
 
 # build kernel, dtb and D457 driver
-./build_all.sh 6.0 ./Linux_for_Tegra/source
+./build_all.sh 6.2 ./Linux_for_Tegra/source
 ```
 Note: dev_dbg() log support will not be enabled by default. If needed, run the `./build_all.sh` script with `--dev-dbg` option like below.
 ```
-./build_all.sh --dev-dbg 6.0 ./Linux_for_Tegra/source
+./build_all.sh --dev-dbg 6.2 ./Linux_for_Tegra/source
 ```
 
-## Archive JetPack 6.0 build results (optional) on build host
-- kernel image : `images/6.0/rootfs/boot/Image`
-- dtb: `images/6.0/rootfs/boot/dtb/tegra234-p3737-0000+p3701-0000-nv.dtb`
-- dtb overlay: `images/6.0/rootfs/boot/tegra234-camera-d4xx-overlay.dtbo`
-- dtb dual camera overlay: `images/6.0/rootfs/boot/tegra234-camera-d4xx-overlay-dual.dtbo`
-- nvidia-oot modules: `images/6.0/rootfs/lib/modules/5.15.136-tegra/updates`
-- kernel modules: `images/6.0/rootfs/lib/modules/5.15.136-tegra/extra`
+## Archive JetPack 6.x build results (optional) on build host
+Assuming 6.2 (or 6.1) build the kernel version is 5.15.148-tegra. For 6.0 the kernel version is 5.15.136-tegra.
+- kernel image : `images/6.x/rootfs/boot/Image`
+- dtb: `images/6.x/rootfs/boot/dtb/tegra234-p3737-0000+p3701-0000-nv.dtb`
+- dtb overlay: `images/6.x/rootfs/boot/tegra234-camera-d4xx-overlay.dtbo`
+- dtb dual camera overlay: `images/6.x/rootfs/boot/tegra234-camera-d4xx-overlay-dual.dtbo`
+- nvidia-oot modules: `images/6.x/rootfs/lib/modules/5.15.148-tegra/updates`
+- kernel modules: `images/6.x/rootfs/lib/modules/5.15.148-tegra/extra`
 
 ```
 echo "Archiving boot configuration build results"
-tar -czf ./images/6.0/boot-config.tar.gz -C "./images/6.0/rootfs/" ./boot
+tar -czf ./images/6.x/boot-config.tar.gz -C "./images/6.x/rootfs/" ./boot
 echo "Archiving nvidia-oot modules"
-tar -czf ./images/6.0/nvidia-oot-modules.tar.gz -C "./images/6.0/rootfs/" ./lib/modules/5.15.136-tegra/updates
+tar -czf ./images/6.x/nvidia-oot-modules.tar.gz -C "./images/6.x/rootfs/" ./lib/modules/5.15.148-tegra/updates
 echo "Archiving kernel HID modules"
-tar -czf ./images/6.0/kernel-hid-modules.tar.gz -C "./images/6.0/rootfs/" ./lib/modules/5.15.136-tegra/extra
+tar -czf ./images/6.x/kernel-hid-modules.tar.gz -C "./images/6.x/rootfs/" ./lib/modules/5.15.148-tegra/extra
 ```
-## Backup JetPack 6.0 boot configuration and drivers (optional)
+## Backup JetPack 6.2 boot configuration and drivers (optional)
 ```
 echo "Backup boot configuration"
 sudo cp /boot/tegra234-p3737-0000+p3701-0000-nv.dtb /boot/tegra234-p3737-0000+p3701-0000-nv-bkp.dtb
@@ -114,20 +118,20 @@ sudo cp /boot/tegra234-p3737-0000+p3701-0000-nv.dtb /boot/tegra234-p3737-0000+p3
 sudo cp /boot/tegra234-p3737-0000+p3701-0005-nv.dtb /boot/tegra234-p3737-0000+p3701-0005-nv-bkp.dtb
 
 echo "backup nvidia-oot modules"
-sudo tar -czf /lib/modules/$(uname -r)/updates.tar.gz -C /lib/modules/$(uname -r)/ updates
+sudo tar -czf /lib/modules/5.15.148-tegra/updates.tar.gz -C /lib/modules/5.15.148-tegra/ updates
 ```
 
 ## Install kernel drivers, extra modules and device-tree to Jetson AGX Orin
 
 Following steps required:
 
-1.	Copy entire directory `images/6.0/rootfs/lib/modules/5.15.136-tegra/updates` from host to `/lib/modules/5.15.136-tegra/` on Orin target
-2.	Copy entire directory `images/6.0/rootfs/lib/modules/5.15.136-tegra/extra` from host to `/lib/modules/5.15.136-tegra/` on Orin target
+1.	Copy entire directory `images/6.x/rootfs/lib/modules/5.15.148-tegra/updates` from host to `/lib/modules/5.15.148-tegra/` on Orin target
+2.	Copy entire directory `images/6.x/rootfs/lib/modules/5.15.148-tegra/extra` from host to `/lib/modules/5.15.148-tegra/` on Orin target
 3.	Copy `tegra234-camera-d4xx-overlay.dtbo` from host to `/boot/tegra234-camera-d4xx-overlay.dtbo` on Orin target
 4.	For dual camera, copy `tegra234-camera-d4xx-overlay-dual.dtbo` from host to `/boot/tegra234-camera-d4xx-overlay-dual.dtbo` on Orin target
 5.  Copy `tegra234-p3737-0000+p3701-0000-nv.dtb` from host to `/boot/` on Orin
 6.  Copy `Image` from host to `/boot/` on Orin
-7.  Copy entire directory `images/6.0/rootfs/lib/modules/5.15.136-tegra/kernel` from host to `/lib/modules/5.15.136-tegra/` on Orin target
+7.  Copy entire directory `images/6.x/rootfs/lib/modules/5.15.148-tegra/kernel` from host to `/lib/modules/5.15.148-tegra/` on Orin target
 8.	Run  $ `sudo /opt/nvidia/jetson-io/jetson-io.py`
     1.	Configure Jetson AGX CSI Connector
     2.	Configure for compatible hardware
@@ -163,23 +167,23 @@ Assuming Jetson has ip: `10.0.0.116`
 
 ```
 # Configuration files
-scp -r images/6.0/rootfs/boot nvidia@10.0.0.116:~/
+scp -r images/6.x/rootfs/boot nvidia@10.0.0.116:~/
 # RealSense support for NVIDIA Tegra
-scp -r images/6.0/rootfs/lib/modules/5.15.136-tegra/updates nvidia@10.0.0.116:~/
+scp -r images/6.x/rootfs/lib/modules/5.15.148-tegra/updates nvidia@10.0.0.116:~/
 # RealSense metadata patched kernel modules and IMU HID support
-scp -r images/6.0/rootfs/lib/modules/5.15.136-tegra/extra nvidia@10.0.0.116:~/
+scp -r images/6.x/rootfs/lib/modules/5.15.148-tegra/extra nvidia@10.0.0.116:~/
 # Updated kernel modules to match the new compiled kernel image
-scp -r images/6.0/rootfs/lib/modules/5.15.136-tegra/kernel nvidia@10.0.0.116:~/
+scp -r images/6.x/rootfs/lib/modules/5.15.148-tegra/kernel nvidia@10.0.0.116:~/
 ```
 
 On Jetson target, assuming backup step was followed:
 
 ```
 # enable RealSense extra formats and metadata
-sudo cp -r ~/extra /lib/modules/$(uname -r)/
+sudo cp -r ~/extra /lib/modules/5.15.148-tegra/
 # enable RealSense MIPI support for D457 GMSL
-sudo cp -r ~/updates /lib/modules/$(uname -r)/
-sudo cp -r ~/kernel/ /lib/modules/5.15.136-tegra/
+sudo cp -r ~/updates /lib/modules/5.15.148-tegra/
+sudo cp -r ~/kernel/ /lib/modules/5.15.148-tegra/
 sudo cp ~/boot/tegra234-camera-d4xx-overlay.dtbo /boot/
 
 # (replace with tegra234-p3737-0000+p3701-0000-nv.dtb on production Orin board)

README_driver.md

@@ -4,7 +4,7 @@
 
 ### Links
 - Intel® RealSense™ camera driver for GMSL* interface [Front Page](./README.md)
-- NVIDIA® Jetson AGX Orin™ board setup - AGX Orin™ [JetPack 6.0](./README_JP6.md) setup guide
+- NVIDIA® Jetson AGX Orin™ board setup - AGX Orin™ [JetPack 6.x](./README_JP6.md) setup guide
 - NVIDIA® Jetson AGX Xavier™ board setup - AGX Xavier™ [JetPack 5.x.2](./README_JP5.md) setup guide
 - NVIDIA® Jetson AGX Xavier™ board setup - AGX Xavier™ [JetPack 4.6.1](./README_JP4.md) setup guide
 - Build Tools manual page [Build Manual page](./README_tools.md)