feat(multidb): Introduce MultiDB client for Active-Active support

.github/workflows/doctests.yaml

@@ -4,7 +4,7 @@ on:
   push:
     branches: [master, examples]
   pull_request:
-    branches: [master, examples]
+    branches: [master, examples, 'feature/**']
 
 permissions:
   contents: read

internal/circuitbreaker/circuit_breaker.go

@@ -0,0 +1,324 @@
+// Package circuitbreaker provides a circuit breaker implementation for fault tolerance.
+package circuitbreaker
+
+import (
+	"sync"
+	"sync/atomic"
+	"time"
+)
+
+// State represents the state of a circuit breaker.
+type State int32
+
+const (
+	// StateClosed indicates the circuit is closed and requests are allowed.
+	StateClosed State = iota
+	// StateOpen indicates the circuit is open and requests are blocked.
+	StateOpen
+	// StateHalfOpen indicates the circuit is testing if the service has recovered.
+	StateHalfOpen
+)
+
+// String returns the string representation of the circuit state.
+func (s State) String() string {
+	switch s {
+	case StateClosed:
+		return "closed"
+	case StateOpen:
+		return "open"
+	case StateHalfOpen:
+		return "half-open"
+	default:
+		return "unknown"
+	}
+}
+
+// Config holds configuration for a circuit breaker.
+type Config struct {
+	// FailureThreshold is the number of failures before opening the circuit.
+	// Default: 5
+	FailureThreshold int
+
+	// SuccessThreshold is the number of successes in half-open state before closing.
+	// Default: 2
+	SuccessThreshold int
+
+	// MaxHalfOpenRequests is the maximum number of requests allowed in half-open state.
+	// If 0, uses SuccessThreshold as the limit.
+	// Default: 0 (uses SuccessThreshold)
+	MaxHalfOpenRequests int
+
+	// OpenTimeout is how long to wait before transitioning from open to half-open.
+	// This is the circuit "grace period" that gives a failed database time to
+	// self-heal before it is probed again.
+	// Default: 60 seconds
+	OpenTimeout time.Duration
+}
+
+// DefaultConfig returns the default circuit breaker configuration.
+func DefaultConfig() Config {
+	return Config{
+		FailureThreshold:    5,
+		SuccessThreshold:    2,
+		MaxHalfOpenRequests: 0,
+		OpenTimeout:         60 * time.Second,
+	}
+}
+
+// applyDefaults fills in zero values with defaults.
+func (c *Config) applyDefaults() {
+	if c.FailureThreshold <= 0 {
+		c.FailureThreshold = 5
+	}
+	if c.SuccessThreshold <= 0 {
+		c.SuccessThreshold = 2
+	}
+	if c.MaxHalfOpenRequests <= 0 {
+		c.MaxHalfOpenRequests = c.SuccessThreshold
+	}
+	if c.OpenTimeout <= 0 {
+		c.OpenTimeout = 60 * time.Second
+	}
+}
+
+// StateChangeCallback is called when the circuit breaker state changes.
+type StateChangeCallback func(oldState, newState State)
+
+// CircuitBreaker implements the circuit breaker pattern.
+type CircuitBreaker struct {
+	config Config
+
+	state       atomic.Int32
+	failures    atomic.Int32
+	successes   atomic.Int32
+	requests    atomic.Int32 // Request count in half-open state
+	lastFailure atomic.Int64 // Unix nano timestamp
+
+	mu        sync.RWMutex
+	callbacks []StateChangeCallback
+}
+
+// New creates a new circuit breaker with the given configuration.
+func New(config Config) *CircuitBreaker {
+	config.applyDefaults()
+	cb := &CircuitBreaker{
+		config: config,
+	}
+	cb.state.Store(int32(StateClosed))
+	return cb
+}
+
+// State returns the current state without triggering any transitions.
+func (cb *CircuitBreaker) State() State {
+	return State(cb.state.Load())
+}
+
+// CheckState returns the current state and may trigger state transitions.
+// Use this when you need to check if requests should be allowed.
+func (cb *CircuitBreaker) CheckState() State {
+	state := State(cb.state.Load())
+
+	if state == StateOpen {
+		// Check if we should transition to half-open.
+		// Guard against a zero timestamp (no failure recorded yet) so we don't
+		// treat the Unix epoch as the last failure and transition immediately.
+		lastFailure := cb.lastFailure.Load()
+		if lastFailure != 0 && time.Now().UnixNano()-lastFailure >= int64(cb.config.OpenTimeout) {
+			if cb.state.CompareAndSwap(int32(StateOpen), int32(StateHalfOpen)) {
+				cb.successes.Store(0)
+				cb.requests.Store(0)
+				cb.notifyCallbacks(StateOpen, StateHalfOpen)
+				return StateHalfOpen
+			}
+		}
+	}
+
+	return State(cb.state.Load())
+}
+
+// IsAllowed returns true if a request should be allowed through.
+// This is a convenience method that combines CheckState with half-open request limiting.
+func (cb *CircuitBreaker) IsAllowed() bool {
+	state := cb.CheckState()
+
+	switch state {
+	case StateClosed:
+		return true
+	case StateOpen:
+		return false
+	case StateHalfOpen:
+		// Limit requests in half-open state
+		requests := cb.requests.Add(1)
+		if int(requests) > cb.config.MaxHalfOpenRequests {
+			cb.requests.Add(-1) // Revert
+			return false
+		}
+		return true
+	default:
+		return false
+	}
+}
+
+// ReleaseHalfOpen returns a half-open request slot previously reserved by a
+// successful IsAllowed call when the operation produced neither a recordable
+// success nor failure (for example, it was aborted for an unrelated reason).
+// Without this, a reserved-but-never-completed probe could permanently starve
+// half-open recovery once MaxHalfOpenRequests slots are exhausted. It only has
+// an effect while the breaker is half-open.
+func (cb *CircuitBreaker) ReleaseHalfOpen() {
+	if State(cb.state.Load()) != StateHalfOpen {
+		return
+	}
+	if cb.requests.Add(-1) < 0 {
+		cb.requests.Store(0)
+	}
+}
+
+// RecordSuccess records a successful operation.
+func (cb *CircuitBreaker) RecordSuccess() {
+	state := State(cb.state.Load())
+
+	switch state {
+	case StateHalfOpen:
+		successes := cb.successes.Add(1)
+		// Re-check state after increment - another goroutine may have changed it
+		if State(cb.state.Load()) != StateHalfOpen {
+			return
+		}
+		if int(successes) >= cb.config.SuccessThreshold {
+			if cb.state.CompareAndSwap(int32(StateHalfOpen), int32(StateClosed)) {
+				// Notify callbacks before resetting counters so they observe
+				// the success count that triggered the transition.
+				cb.notifyCallbacks(StateHalfOpen, StateClosed)
+				cb.failures.Store(0)
+				cb.successes.Store(0)
+				cb.requests.Store(0)
+			}
+		}
+	case StateClosed:
+		// Reset failure count on success
+		cb.failures.Store(0)
+	}
+}
+
+// RecordFailure records a failed operation.
+func (cb *CircuitBreaker) RecordFailure() {
+	cb.lastFailure.Store(time.Now().UnixNano())
+	state := State(cb.state.Load())
+
+	switch state {
+	case StateClosed:
+		failures := cb.failures.Add(1)
+		if int(failures) >= cb.config.FailureThreshold {
+			if cb.state.CompareAndSwap(int32(StateClosed), int32(StateOpen)) {
+				// Notify callbacks before clearing the half-open counters so
+				// observers see the failure count that triggered the
+				// transition, matching the half-open -> closed/open paths.
+				cb.notifyCallbacks(StateClosed, StateOpen)
+				// successes and requests should already be 0 in Closed (they
+				// are only incremented while half-open, and every half-open
+				// exit zeroes them). Reset defensively so the invariant
+				// "successes/requests are clean on entry to Open" is upheld
+				// consistently across all transitions into Open, even if a
+				// future change starts touching those counters in Closed.
+				cb.successes.Store(0)
+				cb.requests.Store(0)
+			}
+		}
+	case StateHalfOpen:
+		// Any failure in half-open state opens the circuit.
+		if cb.state.CompareAndSwap(int32(StateHalfOpen), int32(StateOpen)) {
+			// Notify callbacks before resetting counters so they observe the
+			// counts that triggered the transition, matching the half-open ->
+			// closed path in RecordSuccess.
+			cb.notifyCallbacks(StateHalfOpen, StateOpen)
+			cb.successes.Store(0)
+			cb.requests.Store(0)
+		}
+	}
+}
+
+// OnStateChange registers a callback to be called when the state changes.
+func (cb *CircuitBreaker) OnStateChange(callback StateChangeCallback) {
+	cb.mu.Lock()
+	defer cb.mu.Unlock()
+	cb.callbacks = append(cb.callbacks, callback)
+}
+
+// notifyCallbacks notifies all registered callbacks of a state change.
+func (cb *CircuitBreaker) notifyCallbacks(oldState, newState State) {
+	cb.mu.RLock()
+	callbacks := make([]StateChangeCallback, len(cb.callbacks))
+	copy(callbacks, cb.callbacks)
+	cb.mu.RUnlock()
+
+	for _, callback := range callbacks {
+		callback(oldState, newState)
+	}
+}
+
+// Reset resets the circuit breaker to closed state.
+// If the circuit was not already closed, callbacks are notified.
+func (cb *CircuitBreaker) Reset() {
+	oldState := State(cb.state.Swap(int32(StateClosed)))
+	cb.failures.Store(0)
+	cb.successes.Store(0)
+	cb.requests.Store(0)
+	cb.lastFailure.Store(0)
+	if oldState != StateClosed {
+		cb.notifyCallbacks(oldState, StateClosed)
+	}
+}
+
+// Stats returns current statistics for monitoring.
+type Stats struct {
+	State           State
+	Failures        int32
+	Successes       int32
+	Requests        int32
+	LastFailureTime time.Time
+}
+
+// Stats returns current statistics.
+func (cb *CircuitBreaker) Stats() Stats {
+	lastFailure := cb.lastFailure.Load()
+	var lastFailureTime time.Time
+	if lastFailure > 0 {
+		lastFailureTime = time.Unix(0, lastFailure)
+	}
+
+	return Stats{
+		State:           cb.State(),
+		Failures:        cb.failures.Load(),
+		Successes:       cb.successes.Load(),
+		Requests:        cb.requests.Load(),
+		LastFailureTime: lastFailureTime,
+	}
+}
+
+// Execute runs the given function with circuit breaker protection.
+// Returns ErrCircuitOpen if the circuit is open and not ready for testing.
+func (cb *CircuitBreaker) Execute(fn func() error) error {
+	if !cb.IsAllowed() {
+		return ErrCircuitOpen
+	}
+
+	err := fn()
+	if err != nil {
+		cb.RecordFailure()
+		return err
+	}
+
+	cb.RecordSuccess()
+	return nil
+}
+
+// ErrCircuitOpen is returned when the circuit breaker is open.
+var ErrCircuitOpen = &CircuitOpenError{}
+
+// CircuitOpenError indicates the circuit breaker is open.
+type CircuitOpenError struct{}
+
+func (e *CircuitOpenError) Error() string {
+	return "circuit breaker is open"
+}