How to install firmware on your ESP

Jump to bottom Edit New page

Robert van den Breemen edited this page Jan 1, 2023 · 41 revisions

To install firmware on your ESP using esptool.exe:

If your ESP is already on the OTGW, power down the gateway and unplug the ESP from the OTGW.
Connect the ESP to a PC using a Micro USB lead. If no driver, try: WeMos or NodeMCU.
Download both .bin files from our github and also esptool (you will need to unzip it).
Rename the .bin files to ino.bin and fs.bin. Make sure esptool.exe is on your path.
Identify your ESP port, e.g. on Windows try mode|for /f "tokens=4" %a in ('findstr COM') do @echo %a.
Run esptool -cp COM3 -cd nodemcu -cb 921600 erase_flash -cf ino.bin -ca 0x200000 -cf fs.bin (replace COM3 with ESP port).
You should see a series of lines ending with [ 100% ]. The blue light should blink fast during programming then slowly.
Unplug the ESP and install into your OTGW (be sure it's the right way round!), then power on the OTGW.

You are welcome to contribute to my projects, just do a pull request or give feedback through issues.

Navigation is the right of this! -->>>>>>>>>