pinger

A python script for pinging your assigned zone:

• python3 main.py

• -a 192.168.1

• -s 0

• -ra 255

• -inter 1

• -inter_name "network interface"

• -mac 1

• -ports 1

• -breaks 1

• -v 1

  network interfaces = ['lo', 'enp0s25', 'wlp3s0']

  usage: main.py [-h] [-a A] [-s S] [-ra RA] [-inter INTER] [-inter_name INTER_NAME] [-mac MAC] [-ports PORTS] [-breaks BREAKS] [-v VERSION]

• Write ip addders without the last octet - example python3 main.py -a 192.168.1 -s 0 -ra 255 ['lo', 'enp0s25', 'wlp3s0']

options:

• -h, --help show this help message and exit -a A, --adress_zone A

  Enter the address without the last octet and period

  -s S, --start_address S

  Enter the address you want to start scanning

  -ra RA, --range RA Enter the last address to be scanned

  -inter INTER, --interface INTER

  Optionally, if you want the scan to be on the specified interface only, specify 1 ['lo', 'enp0s25', 'wlp3s0']

  -inter_name INTER_NAME, --interface_name INTER_NAME

  Optionally, enter the interface from which you want to scan ['lo', 'enp0s25', 'wlp3s0']

  -mac MAC, --mac MAC Optionally, if you want the mac address of all detected devices to be displayed

  -ports PORTS, --ports PORTS

  Optionally, displays all open ports of the found devices IMPORTANT!!! For now to run this function you need to run it through sudo with -ports 2 flag You can scan all ports up to 11000 port without sudo and use -ports 1 flag.

  -breaks BREAKS, --breaks BREAKS

  Optionally, as soon as you want to stop at the first address you see

  -v VERSION, --version VERSION

  Version programm

  TODO Add the ability to customize the interval between pings and response time, so that you can configure the utility for your specific needs.

  Add the ability to save ping results to a file or database so that you can analyze historical data on host availability.

  Add the ability to send notifications via email or messengers when host availability changes.

  Implement the ability to monitor not only hosts, but also network devices (such as routers).

  Add support for configuration files so that you can configure the utility without changing the source code.