Version 01.00.01 RC1

Updates in this version

• Support for a Spark Fun Soil Sensor - connected via GPIO
• Fix for issue #8 - LoRaWAN encoding incorrect for the BME385

Version 01.01.00 RC2

Updates

• Added support for firmware update via SD Card

  • Uses bin files named using the following pattern: "sfeIoTNodeLoRaWAN_*.bin" that are located on the SD card root directory.

• All previous updates in Version 01.00.01 RC4 (Region setting, uses latest Digi XBeeArduino library).

• Enables support for the on-board SD Card

  • Requires a FAT formatted SD card

• Enable SD card data logging

  • CSV and JSON formats
  • Auto Data file rotation for log files

• Enable preference save/restore from JSON file on the SD card

  • Uses the file named iot-node-lorawan.json
  • Method to rapidly provision new boards

• Enabled SD card related reporting

• Enabled JSON pref setting via the serial console /connection (! commands)

Version 01.01.00 RC1

Updates

• All previous updates in Version 01.00.01 RC4 (Region setting, uses latest Digi XBeeArduino library).
• Enables support for the on-board SD Card
  • Requires a FAT formatted SD card
• Enable SD card data logging
  • CSV and JSON formats
  • Auto Data file rotation for log files
• Enable preference save/restore from JSON file on the SD card
  • Uses the file named iot-node-lorawan.json
  • Method to rapidly provision new boards
• Enabled SD card related reporting
• Enabled JSON pref setting via the serial console /connection (! commands)

Version 01.00.01.RC4

Updates this version

• Continues to use the Digi XBeeArduino library
• Enables region setting during startup - region support now enabled fully

Note

This release requires the XBee LR module on the IoT Node LoRaWAN board to be updated to at least version A5013.
To update the module:

• Download and install XBee Studio from Digi
• On the IoT Node - LoRaWAN board, set the XBee UART switch to USB
• Connect the XBee LR module USB-C connector on the IoT Node - LoRaWAN board to your computer
• Start XBee Studio and update the module
• When the update is complete, unplug the USB-C connection, place the UART switch to RP2350 and update the firmware on the RP2350 to this version

Version 01.00.01 RC3

Updates in this Version

• Testing of latest version of the XBeeArduino library

Version 01.00.01.RC2

Updates in this version

• Support for a Spark Fun Soil Sensor - connected via GPIO
• Fix for issue #8 - LoRaWAN encoding incorrect for the BME385
• GNSS devices now output a Location value [lat,lon] as an array. The value is sent in the same LoRaWAN packet with a Value ID of 0x36

Version 01.00.00 Release Candidate 1

This is the version 1.0.0 RC1 pre-release for the SparkFun IoT Node - LoRaWAN board firmware application.

To install this release:

• Download the firmware binary
• Connect your SparkFun IoT Node - LoRaWAN board to your computer/system.
• Place your SparkFun IoT Node - LoRaWAN board into boot loader mode (the board should appear as a USB drive connected to your system)
• Drag the firmware '.utf' file to your board to installed the new firmware file.

Version 01.00.00

Product release firmware - version 01.00.00

Version 01.00.00 - build 000005

Release Includes

• Initial release of the SparkFun IoT Node -LoRaWAN Firmware
• Supports automatic qwiic board detection and logging to the Digi LoRaWAN ecosystem
• Configured for immediate use with a Digi LoRaWAN gateway
• Settings and configuration accessible via a serial console menu system