dclaude

Run Claude Code or Codex with full autonomous permissions inside a Docker container.

Includes cx for lower token usage.

Action	Link
What is this?	The What
Install Guide	Install
Run & Config Guide	How to Run
Security Overview	Security
Miscellaneous	Miscellaneous

“Ever have a 1-minute task take you 10+ minutes because it's stuck waiting on you approving multiple chained commands?”
_{— I have, many times.}

$ cd $WORK_FOLDER
$ dclaude
$ dcodex

# Claude Code or Codex with full permissions;
# No yes/no time wasting.
# Limited. Can read only the current folder and optional whitelisted ones.

The What

The Problem

“Ever have a 1-minute task take you 10+ minutes because it's stuck waiting on you approving multiple chained commands?”
_{— I have, many times.}

Modern coding harness usage requires many tool calls. They all usually require explicit approval from the user which takes time, breaks your flow and requires more multitasking brainpower than simply letting it YOLO.

But letting it YOLO is dangerous. You're allowing an autonomous system with full access to your computer. It's a security nightmare waiting to happen. Ultimately there's a spectrum where on one side sits max productivity and on the other max security. Here are a few of the ways you can go about this problem:

1. permission-mode auto, or whitelisted permissions

I tried this, but the harness still finds something stupid to block on.

It also isn't fully secure either.

2. run an isolated dev-only VM

Better and more secure, but too much work to set up, and is costly.

3. run inside a sandbox with a limited blast radius

That's what dclaude is here for! :)

What This Is

This repo ships two simple, thin Docker wrappers:

• dclaude - a wrapper on top of Claude Code
• dcodex - a wrapper on top of OpenAI's Codex

When ran from a folder, dclaude runs the coding CLI inside a docker container with the folder bind-mounted. Any changes in the container get reflected in the same folder on your computer.

Some features:

• you can configure read-only folders, like ~/Desktop or ~/Downloads. The container can never write to them and can only read.
• paths are seamless. The container sees the same absolute repo path you see on your computer, so sending the CLI agent an image path like ~/Desktop/image.png just works.
• auth and caches persist across runs.
• the Docker container comes pre-installed with Python and Node. For more languages, either fork this repo or open a PR.

Install

Requirements

• Docker Desktop or Docker Engine with docker
• a trusted repo
• Docker Desktop file sharing enabled for the repo path and each configured home mount on macOS

Option A: Homebrew

brew install stanislavkozlovski/tap/dclaude

Optionally, configure read-only host directories the container can see:

DCLAUDE_HOME="$(dirname "$(readlink -f "$(which dclaude)")")"
cp "$DCLAUDE_HOME/scripts/dclaude.yaml.example" "$DCLAUDE_HOME/scripts/dclaude.yaml"
# edit dclaude.yaml to add your read-only mounts

Option B: Git Clone

git clone https://github.com/stanislavkozlovski/dclaude.git ~/dclaude

Add to your shell profile (~/.bashrc, ~/.zshrc, etc.):

alias dclaude='~/dclaude/dclaude'
alias dcodex='~/dclaude/dcodex'

Optionally, configure read-only host directories the container can see:

cp ~/dclaude/scripts/dclaude.yaml.example ~/dclaude/scripts/dclaude.yaml
# edit dclaude.yaml to add your read-only mounts

How to Run

Quick Start

The container gets read/write access to your current repo and read-only access to any directories you configure in scripts/dclaude.yaml. Nothing else from your host is exposed.

From the repo you want to edit, run:

cd /path/to/repo
dclaude # or dcodex

Note

The very first dcodex/dclaude run can take around 60 seconds while Docker builds the image. Subsequent runs are instant.

If you want GitHub SSH access from inside the container, for example to git push from there, launch with --ssh:

cd /path/to/repo
dclaude --ssh # or dcodex --ssh

If you commit in-container but push from the host yourself, you do not need --ssh.

If you prefer, calling the launcher by its full path also works as long as your current shell is already inside the target repo:

/path/to/dclaude-repo/dclaude
/path/to/dclaude-repo/dcodex

The first run builds the shared image automatically from the launcher repo and starts a warm container for the current repo. Later runs docker exec into that warm container unless you pass --reset or --rebuild.

Wrapper options:

• --rebuild forces a fresh docker build and recreates the warm container
• --reset recreates the warm container before launching
• --stop removes the warm container for the current repo and exits
• --update-tool checks the latest upstream version for this wrapper's CLI, rewrites the pin in the launcher repo, and rebuilds the image after confirmation
• --yes skips the confirmation prompt for --update-tool
• --ssh enables SSH agent forwarding by mounting /run/host-services/ssh-auth.sock and ~/.ssh/known_hosts when available
• --profile NAME (Codex only) uses a named profile with a separate ~/.codex-NAME config directory, giving you isolated auth, state, and skills per profile
• --list-profiles (Codex only) lists available Codex profiles
• --version prints the installed launcher version without requiring Docker or a git repo
• -- passes the remaining arguments to the underlying CLI

Examples:

./dclaude --version
./dcodex -- --help
./dclaude --rebuild
./dcodex --reset
./dcodex --stop
./dcodex --update-tool
./dcodex --update-tool --yes
./dclaude --ssh
./dcodex --ssh
./dcodex --profile magi
./dcodex --profile magi --ssh
./dcodex --list-profiles

Folder Mount Config

The launcher reads a single config file at scripts/dclaude.yaml in the dclaude repo. If no config is present, no extra host directories are mounted beyond the repo itself and shared caches.

To get started, copy the example and edit it:

cp scripts/dclaude.yaml.example scripts/dclaude.yaml

Config shape:

read_only_mounts:
  - ~/Desktop
  - ~/Downloads

Each entry is an absolute path or starts with ~/ (resolved to $HOME). Entries are bind-mounted read-only at the same absolute path inside the container.

Use read_only_mounts: [] to explicitly mount no extra directories.

Configured mounts that overlap ~/.ssh or /run/host-services are rejected. SSH access is only exposed through --ssh.

GitHub SSH Access

SSH is disabled by default.

Pass --ssh to enable GitHub SSH access inside the container.

--ssh is the only supported SSH integration path. It enables forwarded SSH agent access without copying raw private keys into the image.

When enabled, the wrappers mount:

• /run/host-services/ssh-auth.sock
• ~/.ssh/known_hosts read-only when present

They do not mount the full ~/.ssh directory and they never copy private key files into the container. Configured read-only mounts that overlap ~/.ssh or /run/host-services are rejected.

Recommended host checks before using --ssh:

ssh-add -L
ssh -T git@github.com

If those host checks fail, --ssh inside the container will fail too.

Recommended container checks after launching with --ssh:

echo "$SSH_AUTH_SOCK"
ssh-add -L
ssh -T git@github.com

Use a dedicated GitHub key loaded into a dedicated ssh-agent if you want a narrower blast radius.

Security

Security Boundary

This setup is for trusted repos. Anything reachable inside the container is reachable by the agent.

Deliberately omitted:

• docker.sock
• --privileged
• full home-directory mounts
• configured mounts that overlap ~/.ssh or /run/host-services
• copied SSH key files
• API-key auth shortcuts

The Docker build context also ignores any repo-local .ssh directory.

Verify configured read-only mounts by trying to write to them inside the container:

touch ~/Desktop/test   # should fail if ~/Desktop is in your dclaude.yaml

Writing in the repo should still succeed.

Auth Persistence

Auth state is mounted from the host, not copied.

Every bind mount is listed below. If the access column says read/write, edits made inside the container modify the real host path and persist after the container stops.

Host path	Container path	Scope	Access in container	Host persistence	Purpose
target repo root	same absolute path	all launches	read/write	yes	live working tree
scripts/container-launch.sh in this repo	/usr/local/bin/dclaude-container-launch	all launches	read-only	no	bootstrap entrypoint
~/.cache/dclaude/cx	~/.cache/cx	all launches	read/write	yes	cx cache
~/.cache/pip	~/.cache/pip	all launches	read/write	yes	pip cache
~/.cache/uv	~/.cache/uv	all launches	read/write	yes	uv cache
configured read-only mounts from scripts/dclaude.yaml	same absolute path	all launches	read-only	no	extra host files exposed to the container
~/.claude	~/.claude	Claude only	read/write	yes	Claude auth and state
~/.claude.json	~/.claude.json	Claude only	read/write	yes	Claude auth file
~/.config/claude-code	~/.config/claude-code	Claude only	read/write	yes	Claude CLI config
~/.codex (or ~/.codex-NAME with --profile)	same path	Codex only	read/write	yes	Codex auth, state, and skills
/run/host-services/ssh-auth.sock	same absolute path	only with --ssh	SSH agent socket passthrough	host agent is used directly	lets container processes authenticate through the host agent without copying keys
~/.ssh/known_hosts	~/.ssh/known_hosts	only with --ssh when present	read-only	no	host key verification

Anything not listed in the table above is not bind-mounted from the host. Writes to those paths stay container-local and disappear when the warm container is removed or reset.

The launcher may also seed missing guidance into the mounted home directories:

• ~/.claude/CX.md
• ~/.claude/CLAUDE.md
• ~/.codex/AGENTS.md
• ~/.codex/skills/dclaude-cx-navigation

When using --profile NAME, the profile directory ~/.codex-NAME is used instead of ~/.codex. On first use, AGENTS.md and skills are copied from the default ~/.codex if they exist there.

Interactive login happens through the official CLIs inside the container. If you are not logged in yet, run the wrapper and complete the normal login flow there. The mounted state keeps you logged in across container restarts.

API-key auth is intentionally NOT supported for both tools.

Miscellaneous

Docs

Primary docs live under docs/:

• How To Run
• Architecture
• Motivation
• License
• Version
• Sample config

Runtime Model

Every launch does the following:

• resolves the launcher repo from the wrapper script path
• resolves the target repo from your current shell location
• ensures a warm per-tool container exists for that target repo
• bind-mounts the launcher bootstrap script into the container so launcher script changes take effect on warm-container recreation
• bind-mounts the repo read/write at its real host path
• bind-mounts configured read-only directories at the same path (none by default; see scripts/dclaude.yaml.example)
• bind-mounts a persistent container-specific cx cache
• runs as the current host UID/GID
• sets HOME to the host home path
• docker execs into the current host working directory inside the warm container
• creates /workspace as a compatibility alias that resolves back to the repo root

This means:

• pwd inside the container matches the target repo path on the host
• the Docker build context comes from the launcher repo, not the target repo
• the default fast path is warm-container reuse, not a fresh docker run --rm

cx Integration

The shared image includes ind-igo/cx and installs it into your claude/codex skills, so your agent automatically uses cx.

Why it exists: agents burn a ton of tokens on reads. cx reduces that by ~60%.

Persistent cx cache:

• host path: ~/.cache/dclaude/cx
• container path: ~/.cache/cx

Agent SKILL.md integration:

• if ~/.claude/CX.md is missing, the launcher writes it from cx skill
• if ~/.claude/CLAUDE.md is missing, the launcher creates it with @CX.md
• if ~/.claude/CLAUDE.md exists but does not reference @CX.md or already contain cx guidance, the launcher appends @CX.md
• if ~/.codex/AGENTS.md is missing cx guidance, the launcher writes or appends it from cx skill (same for ~/.codex-NAME with profiles)
• if ~/.codex/skills/dclaude-cx-navigation is missing, the launcher seeds it from cx skill (same for profiles)

Rebuilds

By default the wrappers build and reuse dclaude:<version>, where <version> comes from docs/VERSION. DCLAUDE_IMAGE_NAME still overrides that default when you need a custom tag. --rebuild also recreates the warm container so the new image is actually used.

Rebuild explicitly when you want updated pinned tool versions or image changes for the current release tag:

docker build -t "dclaude:$(cat docs/VERSION)" .
./dclaude --rebuild

The image currently pins the installed CLI versions:

• @anthropic-ai/claude-code@2.1.119
• @openai/codex@0.125.0
• cx 0.6.5

The Codex full-access launcher was validated against codex-cli 0.125.0, which supports --dangerously-bypass-approvals-and-sandbox.

Tool Pin Refreshes

Pinned upstream tool versions live in Dockerfile, which controls the globally installed CLIs inside the image. Check or refresh them manually with:

python3 scripts/sync_tool_versions.py
python3 scripts/sync_tool_versions.py --update

Wrapper-driven refresh:

dcodex --update-tool
dclaude --update-tool

--update-tool checks the latest upstream version for the wrapper's own CLI, shows a confirmation prompt, rewrites the launcher pin and docs, rebuilds the image, and lets warm containers recreate automatically on their next launch. Use --yes to skip the confirmation prompt for scripted or non-interactive runs.

A scheduled GitHub Actions workflow runs the same updater, validates that the image still builds, and opens a PR when upstream @anthropic-ai/claude-code, @openai/codex, or cx releases move.

Releases

Release shape:

• docs/VERSION is the source of truth for the launcher version
• CI on pull requests and main runs shellcheck, bash -n, docker build, --help, and --version
• a scheduled tool-update workflow refreshes pinned upstream tool versions and opens a PR when updates are available
• a successful non-bot push to main bumps the patch version, commits chore: release vX.Y.Z, and pushes the matching vX.Y.Z tag
• the tag workflow creates dclaude-vX.Y.Z.tar.gz, publishes the GitHub Release, and updates stanislavkozlovski/homebrew-tap when HOMEBREW_TAP_TOKEN is configured

Homebrew installs both wrappers from the same release tarball and exposes both dclaude and dcodex.