Combined Integrated Boards
The community has come up with several own PCB designs to make it easier to use OpenDTU. This pages intends to document them.
This board was developed by @markusdd and the help of the OpenDTU/ahoy Discord community. It integrates all the components that are necessary to run OpenDTU on 5.5cm x 5.5cm, namely a ESP32-S3-WROOM-1U module, and the complete RF paths for NRF24 (HM series) and CMT2300A (HMS/HMT series) communications. So this PCB can interface with all supported inverters and uses the most modern ESP32-S3 chip.
Generic builds for the esp32-s3-usb are available in the OpenDTU Release section. The board specific documentation is available over at the OpenDTUFusion Documentation repository: https://github.com/markusdd/OpenDTUFusionDocs
OpenDTU alsoo ships a OpenDTUFusion specific pinout JSON in it's repository which can be found here: https://github.com/tbnobody/OpenDTU/blob/master/docs/DeviceProfiles/opendtu_fusion.json
0a 00 20 01 00 0c 08 fc 07 a3 00 0f 09 e2 00 1e 06 4a 00 14 0a 55 00 14 0a c8 00 0a 09 e2 10 03 13 88 12 c0 00 14 13 ec 00 14 12 8e 00 32 14 50 00 32 20 00 00 01 30 03 02 58 09 e2 07 a3 13 9c 13 56 40 00 07 d0 00 10 50 01 00 01 13 9c 01 90 00 10 00 00 60 00 00 01 09 e2 0a 5a 02 15 80 01 00 00 08 5b 01 2c 08 b7 09 41 09 9d 01 2c 00 64 90 00 00 00 00 5f b0 00 00 00 01 f4 00 5f 70 02 00 01 27 10 a0 02 00 00 00 00 d8 8b