Use cover method from Intervention

docs/3.0/api/crop.md

@@ -5,25 +5,25 @@ title: Crop
 
 # Crop
 
-## Fit `fit=crop`
+## Fit `fit=cover` - Crop to cover the dimensions
 
 Resizes the image to fill the width and height boundaries and crops any excess image data. The resulting image will match the width and height constraints without distorting the image.
 
 ~~~ html
-<img src="kayaks.jpg?w=300&h=300&fit=crop">
+<img src="kayaks.jpg?w=300&h=300&fit=cover">
 ~~~
 
 [![© Photo Joel Reynolds](https://glide.herokuapp.com/1.0/kayaks.jpg?w=300&h=300&fit=crop)](https://glide.herokuapp.com/1.0/kayaks.jpg?w=300&h=300&fit=crop)
 
 ### Crop Position
 
-You can also set where the image is cropped by adding a crop position. Accepts `crop-top-left`, `crop-top`, `crop-top-right`, `crop-left`, `crop-center`, `crop-right`, `crop-bottom-left`, `crop-bottom` or `crop-bottom-right`. Default is `crop-center`, and is the same as `crop`.
+You can also set where the image is cropped by adding a crop position. Accepts `cover-top-left`, `cover-top`, `cover-top-right`, `cover-left`, `cover-center`, `cover-right`, `cover-bottom-left`, `cover-bottom` or `cover-bottom-right`. Default is `cover-center`, and is the same as `crop`.
 
 ~~~ html
-<img src="kayaks.jpg?w=300&h=300&fit=crop-left">
+<img src="kayaks.jpg?w=300&h=300&fit=cover-left">
 ~~~
 
-### Crop Focal Point
+## Fit `fit=crop-x%-y%` - Crop based on Focal Point
 
 In addition to the crop position, you can be more specific about the exact crop position using a focal point. This is defined using two offset percentages: `crop-x%-y%`.
 
@@ -45,4 +45,4 @@ Crops the image to specific dimensions prior to any other resize operations. Req
 <img src="kayaks.jpg?crop=100,100,915,155">
 ~~~
 
-[![© Photo Joel Reynolds](https://glide.herokuapp.com/1.0/kayaks.jpg?crop=100,100,915,155)](https://glide.herokuapp.com/1.0/kayaks.jpg?crop=100,100,915,155)
+[![© Photo Joel Reynolds](https://glide.herokuapp.com/1.0/kayaks.jpg?crop=100,100,915,155)](https://glide.herokuapp.com/1.0/kayaks.jpg?crop=100,100,915,155)

docs/3.0/api/size.md

@@ -29,14 +29,16 @@ Sets the height of the image, in pixels.
 
 Sets how the image is fitted to its target dimensions.
 
-### Accepts: 
+### Accepts:
 
 - `contain`: Default. Resizes the image to fit within the width and height boundaries without cropping, distorting or altering the aspect ratio.
-- `max`: Resizes the image to fit within the width and height boundaries without cropping, distorting or altering the aspect ratio, and will also not increase the size of the image if it is smaller than the output size. 
+- `max`: Resizes the image to fit within the width and height boundaries without cropping, distorting or altering the aspect ratio, and will also not increase the size of the image if it is smaller than the output size.
 - `fill`: Resizes the image to fit within the width and height boundaries without cropping or distorting the image, and the remaining space is filled with the background color. The resulting image will match the constraining dimensions.
 - `fill-max`: Resizes the image to fit within the width and height boundaries without cropping but upscaling the image if it's smaller. The finished image will have remaining space on either width or height (except if the aspect ratio of the new image is the same as the old image). The remaining space will be filled with the background color. The resulting image will match the constraining dimensions.
 - `stretch`: Stretches the image to fit the constraining dimensions exactly. The resulting image will fill the dimensions, and will not maintain the aspect ratio of the input image.
-- `crop`: Resizes the image to fill the width and height boundaries and crops any excess image data. The resulting image will match the width and height constraints without distorting the image. See the [crop](api/crop/) page for more information.
+- `cover`: Resizes the image to fill the width and height boundaries and crops any excess image data. The resulting image will match the width and height constraints without distorting the image. See the [crop](api/crop/) page for more information.
+- `crop`: Resizes the image to fill the width and height boundaries and crops any excess image data. (alias for `cover`).
+- `crop-x%-y%`: Resizes the image to fill the width and height boundaries and crops based on a focal point defined by `x%` (left offset) and `y%` (top offset). The resulting image will match the width and height constraints without distorting the image. See the [crop](api/crop/) page for more information.
 
 ~~~ html
 <img src="kayaks.jpg?w=300&h=300&fit=stretch">

docs/3.0/api/watermarks.md

@@ -54,10 +54,11 @@ Sets how the watermark is fitted to its target dimensions.
 - `max`: Resizes the image to fit within the width and height boundaries without cropping, distorting or altering the aspect ratio, and will also not increase the size of the image if it is smaller than the output size.
 - `fill`: Resizes the image to fit within the width and height boundaries without cropping or distorting the image, and the remaining space is filled with the background color. The resulting image will match the constraining dimensions.
 - `stretch`: Stretches the image to fit the constraining dimensions exactly. The resulting image will fill the dimensions, and will not maintain the aspect ratio of the input image.
-- `crop`: Resizes the image to fill the width and height boundaries and crops any excess image data. The resulting image will match the width and height constraints without distorting the image. See the [crop](api/crop/) page for more information.
+- `cover`: Resizes the image to fill the width and height boundaries and crops any excess image data. The resulting image will match the width and height constraints without distorting the image. See the [crop](api/crop/) page for more information.
+- `crop-x%-y%`: Resizes the image to fill the width and height boundaries and crops based on a focal point defined by `x%` (left offset) and `y%` (top offset). The resulting image will match the width and height constraints without distorting the image. See the [crop](api/crop/) page for more information.
 
 ~~~ html
-<img src="kayaks.jpg?mark=logo.png&markw=200&markh=200&markfit=crop">
+<img src="kayaks.jpg?mark=logo.png&markw=200&markh=200&markfit=cover">
 ~~~
 
 ## X-offset `markx`

docs/3.0/config/defaults-and-presets.md

@@ -42,12 +42,12 @@ $server = League\Glide\ServerFactory::create([
         'small' => [
             'w' => 200,
             'h' => 200,
-            'fit' => 'crop',
+            'fit' => 'cover',
         ],
         'medium' => [
             'w' => 600,
             'h' => 400,
-            'fit' => 'crop',
+            'fit' => 'cover',
         ]
     ]
 ]);
@@ -57,12 +57,12 @@ $server->setPresets([
     'small' => [
         'w' => 200,
         'h' => 200,
-        'fit' => 'crop',
+        'fit' => 'cover',
     ],
     'medium' => [
         'w' => 600,
         'h' => 400,
-        'fit' => 'crop',
+        'fit' => 'cover',
     ]
 ]);
 ~~~
@@ -89,4 +89,4 @@ It's even possible to use presets with additional parameters:
 
 ## Overriding defaults and presets
 
-You can override the default and preset manipulations for a specific request by passing a new parameter (e.x. `mark=different.png`), or even disable it entirely by setting it to blank (e.x. `mark=`).
+You can override the default and preset manipulations for a specific request by passing a new parameter (e.x. `mark=different.png`), or even disable it entirely by setting it to blank (e.x. `mark=`).

docs/3.0/simple-example.md

@@ -16,7 +16,7 @@ In your templates simply define how the image will be manipulated. Using Glide's
 <h1><?=$user->name?></h1>
 
 <!-- display profile image cropped to 300x400 -->
-<img src="/img/users/<?=$user->id?>.jpg?w=300&h=400&fit=crop">
+<img src="/img/users/<?=$user->id?>.jpg?w=300&h=400&fit=cover">
 ~~~
 
 <p class="message-notice">For simplicity this example has omitted HTTP signatures, however in a production environment it's very important to <a href="/2.0/config/security/">secure your images</a>.</p>

src/Manipulators/Size.php

@@ -107,11 +107,15 @@ public function getFit(): string
     {
         $fit = (string) $this->getParam('fit');
 
-        if (in_array($fit, ['contain', 'fill', 'max', 'stretch', 'fill-max'], true)) {
+        if (in_array($fit, ['contain', 'fill', 'max', 'stretch', 'fill-max', 'cover'], true)) {
             return $fit;
         }
 
-        if (preg_match('/^(crop)(-top-left|-top|-top-right|-left|-center|-right|-bottom-left|-bottom|-bottom-right|-[\d]{1,3}-[\d]{1,3}(?:-[\d]{1,3}(?:\.\d+)?)?)*$/', $fit)) {
+        if (preg_match('/^(crop|cover)(-top-left|-top|-top-right|-left|-center|-right|-bottom-left|-bottom|-bottom-right?)*$/', $fit)) {
+            return 'cover';
+        }
+
+        if (preg_match('/^(crop)(-[\d]{1,3}-[\d]{1,3}(?:-[\d]{1,3}(?:\.\d+)?)?)*$/', $fit)) {
             return 'crop';
         }
 
@@ -245,6 +249,10 @@ public function runResize(ImageInterface $image, string $fit, int $width, int $h
             return $this->runStretchResize($image, $width, $height);
         }
 
+        if ('cover' === $fit) {
+            return $this->runCoverResize($image, $width, $height);
+        }
+
         if ('crop' === $fit) {
             return $this->runCropResize($image, $width, $height);
         }
@@ -344,6 +352,25 @@ public function runCropResize(ImageInterface $image, int $width, int $height): I
         return $image->crop($width, $height, $offset_x, $offset_y);
     }
 
+    /**
+     * Perform crop resize image manipulation.
+     *
+     * @param ImageInterface $image    The source image.
+     * @param int            $width    The width.
+     * @param int            $height   The height.
+     * @param ?string        $position The position of the crop
+     *
+     * @return ImageInterface The manipulated image.
+     */
+    public function runCoverResize(ImageInterface $image, int $width, int $height, ?string $position = null): ImageInterface
+    {
+        $position ??= str_replace(['crop-', 'cover-'], '', (string) $this->getParam('fit'));
+
+        $position = empty($position) || in_array($position, ['crop', 'cover']) ? 'center' : $position;
+
+        return $image->cover($width, $height, $position);
+    }
+
     /**
      * Resolve the crop resize dimensions.
      *