Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Possibly using variable 'Gui' before assignment (possibly-used-before-assignment)

Using variable 'camera' before assignment (used-before-assignment)

Module 'Path' has no 'Path' member (no-member)

Module 'Path' has no 'Path' member (no-member)

Module 'Path' has no 'Command' member (no-member)

Module 'Path' has no 'Command' member (no-member)

Module 'Path' has no 'Command' member (no-member)

Module 'Path' has no 'Command' member (no-member)

Module 'Path' has no 'Command' member (no-member)

Module 'Path' has no 'Command' member (no-member)

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

$GITHUB_STEP_SUMMARY upload aborted, supports content up to a size of 1024k, got 3628k. For more information see: https://docs.github.com/actions/using-workflows/workflow-commands-for-github-actions#adding-a-markdown-summary

implicit conversion from 'const int64_t' (aka 'const long long') to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Wimplicit-const-int-float-conversion]

implicit conversion from 'const int32_t' (aka 'const int') to 'float' changes value from 2147483647 to 2147483648 [-Wimplicit-const-int-float-conversion]

implicit conversion from 'const uint32_t' (aka 'const unsigned int') to 'float' changes value from 4294967295 to 4294967296 [-Wimplicit-const-int-float-conversion]

implicit conversion from 'const int64_t' (aka 'const long long') to 'float' changes value from 9223372036854775807 to 9223372036854775808 [-Wimplicit-const-int-float-conversion]

implicit conversion from 'const int64_t' (aka 'const long long') to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Wimplicit-const-int-float-conversion]

unused parameter 'tol' [-Wunused-parameter]

unused parameter 'tol' [-Wunused-parameter]

unused parameter 'tol' [-Wunused-parameter]

unused parameter 'tol' [-Wunused-parameter]

unused parameter 'tol' [-Wunused-parameter]

rin ==> ring, rink, rind, rain, rein, ruin, grin

rin ==> ring, rink, rind, rain, rein, ruin, grin

rin ==> ring, rink, rind, rain, rein, ruin, grin

rin ==> ring, rink, rind, rain, rein, ruin, grin

rin ==> ring, rink, rind, rain, rein, ruin, grin

rin ==> ring, rink, rind, rain, rein, ruin, grin

re-use ==> reuse

re-use ==> reuse

Commiting ==> Committing

completly ==> completely

The face names are suitable for selection later on when creating <-- trailing whitespace

list(tuple): a list of tuple of v1, e1, v2, e2 where v1 is the <-- trailing whitespace

intersection on the first edge e1, and v2 is the intersection <-- trailing whitespace

# If both v1 and v2 are extremities then the edges <-- trailing whitespace

# create a convex hull and use these points instead. Maybe <-- trailing whitespace

# overkill for a 4 point wall, however not sure how to invert <-- trailing whitespace

# doorOrWndow. It might not be correct for roof windows and floor <-- trailing whitespace

# <-- trailing whitespace

# The general process is as follow: <-- trailing whitespace

# Determine the base vertex that I later use for the doorOrWindow <-- trailing whitespace

would reformat src/Mod/PartDesign/PartDesignTests/TestMultiTransform.py

would reformat src/Mod/PartDesign/PartDesignTests/TestInvoluteGear.py

would reformat src/Mod/BIM/importers/importSH3DHelper.py

would reformat src/Mod/PartDesign/PartDesignTests/TestTopologicalNamingProblem.py

Line too long (106/100) (line-too-long)

Line too long (114/100) (line-too-long)

Line too long (125/100) (line-too-long)

Line too long (103/100) (line-too-long)

Line too long (105/100) (line-too-long)

Line too long (104/100) (line-too-long)

Line too long (113/100) (line-too-long)

Line too long (124/100) (line-too-long)

Bad indentation. Found 6 spaces, expected 8 (bad-indentation)

Bad indentation. Found 6 spaces, expected 8 (bad-indentation)

Is this a non-const reference? If so, make const or use a pointer: T &dst [runtime/references] [2]

Is this a non-const reference? If so, make const or use a pointer: App::any &value [runtime/references] [2]

Use int16_t/int64_t/etc, rather than the C type long [runtime/int] [4]

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

unused parameter 'tol' [-Wunused-parameter]

unused parameter 'tol' [-Wunused-parameter]

unused parameter 'tol' [-Wunused-parameter]

unused parameter 'tol' [-Wunused-parameter]

unused parameter 'tol' [-Wunused-parameter]

unused parameter 'tol' [-Wunused-parameter]

unused parameter 'tol' [-Wunused-parameter]

unused parameter 'tol' [-Wunused-parameter]

unused variable 'aaaa' [-Wunused-variable]

unused parameter 'tol' [-Wunused-parameter]

No files were found with the provided path: D:\a\FreeCAD\FreeCAD/logs/ /var/crash/*FreeCAD*. No artifacts will be uploaded.

'=': conversion from 'size_t' to '_Ty', possible loss of data

No files were found with the provided path: D:\a\FreeCAD\FreeCAD/report/Pixi-13409542086-windows-latest-report.md. No artifacts will be uploaded.