Irisys Vector 4D MQTT To InfluxDB v1.x

This code stores data from an Irisys Vector 4D sensor by pulling data from MQTT and sending it to an InfluxDB v1.x database.

Data Formats

This script publishes three measurements to InfluxDB.

1. `occupancy_count`

The main measurement is occupancy_count which is the count of the estimated number of occupants in the room. The structure of this message looks like:

point = {
	"measurement": "occupancy_count",
	"fields": {
		"value": <occupancy count integer>
	}
    "tags": {
    	"method": "vector_4d",
        "device_id": device_id,
        "receiver": "influxdb-mqtt-irisys",
    },
    "time": ts,
}

When creating new occupancy streams, use the same measurement name with the single field "value". Be sure to include a tag called "method" which is set to a descriptive name for the technique used to generate the occupancy count estimate.

2. `vector_4d_count`

The vector_4d_count measurement includes a Vector 4D's register count.

point = {
	"measurement": "vector_4d_count",
	"fields": {
		"value": <register value>
	}
    "tags": {
    	"register_name": <register name>,
        "device_id": device_id,
        "receiver": "influxdb-mqtt-irisys",
    },
    "time": ts,
}

A separate point will be created for each register.

3. `vector_4d_count_occupancy`

The vector_4d_count_occupancy measurement includes all of the raw data used to generate the occupancy estimate.

point = {
	"measurement": "vector_4d_count_occupancy",
	"fields": {
		"enter_offset": <Saved Enter offset>,
        "exit_offset": <Saved Exit offset>,
        "enter_count": <Enter>,
        "exit_count": <Exit>,
        "enter": <Enter count after offset>,
        "exit": <Exit count after offset>,
        "occupancy_raw": <Enter - Exit>,
        "occupancy_count": <occupancy count>,
	}
    "tags": {
        "device_id": device_id,
        "receiver": "influxdb-mqtt-irisys",
    },
    "time": ts,
}

The occupancy_raw value does not check for negative occupancy values.

Configuration

There are few setup steps required to use this script.

Vector 4D Setup

The Vector 4D needs to publish to MQTT. We are currently only using the Live Counts topic, which needs to be set to use the topic name irisys/<device id>/live_counts.

Configuring This Script

Need two configuration files:

In /etc/swarm-gateway/influx.conf:

url=<hostname>
port=443
username=<influx username>
password=<influx user password>
database=<database name>

and /etc/swarm-gateway/mqtt.conf:

username=<mqtt username>
password=<mqtt password>
hostname=<mqtt url>
port=8883

Other Notes

This script publishes to a special URL <influx host>/gateway/write, rather than just /write. This enables us to add metadata before the data are stored in the database. You can easily remove this if you do not need it.

uva-linklab/irisys-mqtt-influxdb

ErrorLooks like something went wrong!

About

Resources

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages