Cand

TODO: Add description

{:ok, pid} = Cand.Socket.start_link
Cand.Protocol.connect(pid, {192,168,0,12}, 28600)
Cand.Protocol.open(pid, 'can0')
Cand.Protocol.rawmode(pid)

Cand.Protocol.send(pid, "295", 8, "64 6E 74 70 61 6E 69 63")

Socket

connect(Socket, host, port)

connect(host, port)

{:ok, Socket} = Socket.connect(Socket, host, port)

{:ok, Socket} = Socket.connect(host, port)

Protocol

connect(host, port)

open(pid, canbus)

send(pid, can_id, ...)

echo(pid)

rawmode(pid)

bcmmode(pid)

Test

Before running the tests, you need to set up a virtual CAN interface. Run the following commands:

sudo ip link add dev vcan0 type vcan
sudo ip link set vcan0 up

You may need to install the following dependencies:

• can-utils (for Linux-based systems)

Then run the tests with:

mix test