AMICI v0.34.2

Bugfix release.

• Python 3.14 compatibility
• Swig 4.4.0 compatibility
• Fixes a bug that resulted in incorrect processing of initial assignments
  containing (amici-)splines
• Fixes an SBML import error during the handling of algebraic rules
• Fixes a CMake error with certain CMake versions
• Fixes type annotations in swig wrappers

Full Changelog: v0.34.1...v0.34.2

AMICI v0.34.1

Bugfix release.

• Fixed a bug that would lead to incorrect model initialization in SBML models
  with initial assignments that depend on dynamic entities
  (by @dweindl in #2939)

Full Changelog: v0.34.0...v0.34.1

AMICI v0.34.0

The amici 0.34.0 release contains a number of bug fixes and new features.

Note that this will probably be the last release to include the MATLAB interface.

Fixes

• Breaking changes Events are now also handled during pre-equilibration, presimulation, and post-equilibration.
  This may be a breaking change, as it may lead to different results for models with events that may trigger during these periods. This change is considered a bugfix, as it was not intended to ignore events during these periods.
  (by @dweindl in #2777, #2780, #2859, #2881, #2889, #2920, #2921, #2925)
• Fixed various issues related to adjoint sensitivity analysis for models with events.
  While many cases are now supported, it is still highly recommended to check the ASA results for models with events against forward sensitivities or finite differences.
  • Adjoint sensitivities for Python-imported models with events (by @paulstapor & @dweindl in #1539)
  • Fix Model::addAdjointQuadratureEventUpdate (by @dweindl in #2787)
  • Fix indexing errors for adjoint quadratures during event updates (by @dweindl in #2796)
  • Fix deltaxB dimensions (by @dweindl in #2803)
  • Fix (some) ASA event handling (by @dweindl in #2797)
• Fixed a number of issues related to the handling of events or discontinuities in general:
  • Fixed import of DAE models with events (by @dweindl in #2897)
  • Fixed root functions for events with initialValue=trigger=false (by @dweindl in #2910)
  • Fixed check for sign change, fix Heaviside update (by @dweindl in #2927)
• Fixed sign of residuals (by @dweindl in #2896)
• Updated the steady state notebook to match the current implementation (by @plakrisenko & @dweindl in #2891)
• Improved sigma<=0 error reporting (by @FFroehlich in #2829)
• Fixed sensitivities for the total abundances of conservation laws (only relevant if AMICI_EXPERIMENTAL_SBML_NONCONST_CLS is enabled) (by @dweindl in #2782)
• Fix sensitivities w.r.t. unused log-scaled NaN parameters (by @dweindl in #2903)

Features

• AMICI should now be pip-installable without pre-installing SWIG or BLAS (by @dweindl in #2774, #2772)
• Event/discontinuity handling for JAX models
  • Track discontinuities in JAX & fix gradient for models with parameter dependent roots (by @FFroehlich in #2815)
  • Improve JAX event integration (by @FFroehlich in #2841)
  • mask event functions in jax (by @FFroehlich in #2863)
• Handle state-independent, parameter-dependent event triggers without root-finding (by @dweindl in #2913)
• Presimulation is now also supported in combination with adjoint sensitivities (by @dweindl in #2786)
• It is now possible to set a separate $t_0$ for pre-equilibration and main simulation (by @dweindl in #2793)
• Sensitivity analysis for AlgebraicRule / DAE models is now also supported for Python-imported models
  (by @dweindl in #2101)
• An optional random generator seed can now be passed to ExpData::ExpData(ReturnData const&, ...) when generating synthetic measurements (by @dweindl in #2802)
• Added ReturnData::plist (by @dweindl in #2874)

... and extended tests, documentation, and many changes under the hood.

Full Changelog: v0.33.0...v0.34.0

AMICI v0.33.0

Note that this release requires Python >= 3.11.

Fixes

• Fixed an issue in SBML AlgebraicRule processing leading to import failure if a species occurred in multiple AlgebraicRules

  by @dweindl in #2744

• Fixed a potential segfault when running forward sensitivity analysis for models without state variables

  by @FFroehlich in #2749

• Fixed a dimension bug for presimulation parameters in ExpDataView

  by @FFroehlich in #2746

• Fixed incorrect initialization for initial assignments with explicit time dependence

  by @dweindl in #2779

Features

• AMICI now supports SBML events with use_values_from_trigger_time=true

  by @dweindl in #2741

• AMICI now supports SBML events with constant priorities

  by @dweindl in #2730

Other changes

• doc: Added a caveats section listing some known issues and potentially unexpected behavior in AMICI

  by @dweindl in #2735

• Added warnings for presimulation and steady state simulation with events. So far, events were not fully supported in these modes. This is subject to change.

  by @dweindl in #2755

Full Changelog: v0.32.0...v0.33.0

AMICI v0.32.0

Breaking changes

• Removed deprecated amici.petab_* modules (now under amici.petab.*)

  by @dweindl in #2658

• Removed deprecated CLI options to amici_import_petab

  by @dweindl in #2671

Changed requirements

• AMICI now requires a C++20-compatible compiler

  by @dweindl in #2660

• AMICI now requires swig>=4.1

  by @dweindl in #2693

• AMICI now uses the sbmlmath package for sympification of SBML math constructs

  by @dweindl in #2681

Fixes

• Fixed Heaviside functions for <, > <=, >= which could have lead to incorrect simulation results.

  Note that > and >=, as well as < and <= can't be distinguished in some cases (see #2707). Avoid situations where this would matter.

  by @dweindl in #2701

• Prevent segfaults under pytest after swig4.3 wrapping

  by @dweindl in #2696

• Fixed SetuptoolsDeprecationWarning: \project.license` as a TOML table is deprecated`

  by @dweindl in #2697

• Updated Dockerfile, use Ubuntu 24.04 LTS

  by @dweindl in #2698

• SBML import: Handle unsolvable event triggers

  by @dweindl in #2705

• Added RTFUNC_FAIL simulation status

  by @dweindl in #2702

• doc: Enable building docs with Python 3.13

  by @dweindl in #2704

• Fixed crash for models without state variables

  by @dweindl in #2703

• SBML import: avoid repeated xdot==0 checks

  by @dweindl in #2706

• Fixed Boolean to float conversion issues during SBML import

  by @dweindl in #2725

Features

• Support for XOR, == and != operators in SBML models

  Note that not all (combinations of) Boolean functions will work well with AMICI's root-finding. It's recommended to verify the results.

  by @dweindl in #2699, #2708, and #2716

Full Changelog: v0.31.2...v0.32.0

AMICI v0.31.2

Bugfix-only release.

• SBML import: Handle unsolvable event triggers
  by @dweindl in #2686
• Fixed a clang compiler warning related to variable length arrays
  by @FFroehlich in #2688
• Temporarily require interpax<=0.3.6
  by @dweindl in #2678
• Update OpenBLAS installation script to work with CMake>=4
  by @dweindl in #2679
• GHA: Don't run cron jobs on forks by @dweindl in #2669
• Fixed Matlab documentation build with CMake 4.0
  by @dweindl in #2676

Full Changelog: v0.31.1...v0.31.2

AMICI v0.31.1

Bugfix-only release.

• Handle relational operators in SBML import
  by @dweindl in #2652

Full Changelog: v0.31.0...v0.31.1

AMICI v0.31.0

• Added RDataReporting::observables_likelihood for computing observables, likelihood and the respective sensitivities
  by @dweindl in #2627, #2633
• JAX:
  • Updated diffrax & jaxlib
    by @FFroehlich in #2632
  • Avoid silent preequilibration failure in JAX
    by @FFroehlich in #2631
  • jax vectorisation
    by @FFroehlich in #2636
  • No flattening of timepoint specific overrides in jax
    by @FFroehlich in #2641
• Faster PEtab parameter mapping
  by @dweindl in #2638, #2640

Full Changelog: v0.30.1...v0.31.0

AMICI v0.30.1

Bugfix-only release.

• Removed eqx.debug.nan, fixes #2629
  by @FFroehlich in #2630
• Fixes an SBML import issue that led to incorrect results for models with
  species-dependent initial assignments (fixes #2642)
  by @FFroehlich in #2643
• Fixed CVodeGetSensDky error message
  by @dweindl in #2644
• Disabled CvodeF checkpointing to prevent certain rare crashes when forward
  integration takes exactly maxsteps integration steps, plus some additional
  yet unclear condition.
  by @dweindl in #2645
• Fixed rare crashes due to uncaught exceptions in ~FinalStateStorer
  by @dweindl in #2647

Full Changelog: v0.30.0...v0.30.1

AMICI v0.30.0

Please note that the amici JAX model generation introduced in v0.29.0 is experimental, the API may substantially change in the future. Use at your own risk and do not expect backward compatibility.

Features

• Added serialisation for JAX models

  by @FFroehlich in #2608

• Disabled building the C++ extension by default when generating a JAX model

  by @FFroehlich in #2609

• Separate pre-equilibration and dynamic simulation in jax

  by @FFroehlich in #2617

• State reinitialisation in JAX

  by @FFroehlich in #2619

Fixes

• Fixed ModelStateDerived copy ctor (fixes potential segfaults)

  by @dweindl in #2612

• PEtab parameter mapping: fill in fixed parameter values for initial values

  by @dweindl in #2613

• nan-safe log&divide for JAX models

  by @FFroehlich in #2611

Full Changelog: v0.29.0...v0.30.0