SIDKick pico v0.211

This release contains the firmware for SIDKick pico with only minor changes:
the reset behavior has been modified to avoid the problems reported for old ultimax cartridges (e.g. Jupiter Lander).

Note: there are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off AND for hardware revision 0.1 and 0.2, and the new SIDKick pico2040DAC.

This version includes the same features that have been introduced with the 0.21 step:

• flashing PRGs from disk drive 8 (<200 blocks)
• timing diagnostics and adjustment
• removing of audio bumps/ramps in PWM output (please report if this got worse with 0.211)
• optional offsetting of paddle values (in case diagnostic ROMs complain)

Please read the troubleshooting section in case you experience problems.

SIDKick pico v0.21

This release contains the firmware for SIDKick pico.

Note: there are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off AND for hardware revision 0.1 and 0.2, and the new SIDKick pico2040DAC.

The 0.21 version includes new features such as:

• flashing PRGs from disk drive 8 (<200 blocks)

• timing diagnostics and adjustment

• removing of audio bumps/ramps in PWM output

• optional offsetting of paddle values (in case diagnostic ROMs complain)

Please read the troubleshooting section in case you experience problems.

SIDKick pico v0.202

This release contains the firmware for SIDKick pico.

Note: there are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off AND for hardware revision 0.1 and 0.2.

This release contains the fix for the NTSC-specific bug of firmware version 0.20 (and the fix for the bug I introduced with 0.201 :-)).

The 0.20x versions include some new features such as:

• FM emulation
• built-in PRG launcher

... and also some bugfixes, better stability (e.g. paddle/mouse handling). Please read the troubleshooting section in case you experience problems.

SIDKick pico v0.201

This release contains the firmware for SIDKick pico.

Note: there are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off AND for hardware revision 0.1 and 0.2.

This release contains the fix for the NTSC-specific bug of firmware version 0.20.

The 0.20x versions include some new features such as:

• FM emulation
• built-in PRG launcher

... and also some bugfixes, better stability (e.g. paddle/mouse handling). Please read the troubleshooting section in case you experience problems.

SIDKick pico v0.20

This release contains the firmware for SIDKick pico.

Note: there are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off AND for hardware revision 0.1 and 0.2.

Note: I might have compiled a NTSC-specific bug into this release -- will be fixed in a couple of days. In case you experience problems (and have hardware revision 0.1) use firmware 0.14 until then.

This version includes some new features such as:

• FM emulation
• built-in PRG launcher

... and also some bugfixes, better stability (e.g. paddle/mouse handling). Please read the troubleshooting section in case you experience problems.

SIDKick pico v0.14

This release contains the firmware for SIDKick pico.

Note: there are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off .

Version 0.14 fixes some problems that sneaked into 0.13.

Updates for version 0.12 and 0.13:

• fixed bus value ttl
• more accurate timing of SID-commands
• flashing RGB-LED (WS2812) on GPIO 23 (installed on some Pico-clones, make sure the solder jumper for the RGB-LED is closed)

SIDKick pico v0.13

This release will be replaced soon, please wait for an update!

This release contains the firmware for SIDKick pico.

Note: there are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off .

Updates for version 0.13:

• fixed bus value ttl

Recent updates (0.12):

• more accurate timing of SID-commands
• flashing RGB-LED (WS2812) on GPIO 23 (installed on some Pico-clones, make sure the solder jumper for the RGB-LED is closed)

SIDKick pico v0.12

This release contains the firmware for SIDKick pico.

Note: there are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off .

Updates for version 0.12:

• more accurate timing of SID-commands
• flashing RGB-LED (WS2812) on GPIO 23 (installed on some Pico-clones, make sure the solder jumper for the RGB-LED is closed)

SIDKick pico v0.11

This release contains the firmware for SIDKick pico.

Note: there are different .uf2-files are firmware files with PWM and/or DAC output, flashing LED on/off.

SIDKick pico v0.1

This release contains the firmware for SIDKick pico.

Note: there are different .uf2-files are firmware files with PWM and/or DAC output, flashing LED on/off.