[nrf fromtree] test: bluetooth: tester: add PAwR configure command to…#4097
Open
m-alperen-sener wants to merge 3351 commits into
Open
[nrf fromtree] test: bluetooth: tester: add PAwR configure command to…#4097m-alperen-sener wants to merge 3351 commits into
m-alperen-sener wants to merge 3351 commits into
Conversation
Fixes some issues with samples/tests by adding configuration files to satisfy TF-M requirements Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no> (cherry picked from commit 20d3749)
Added ncs-specific modules to nrfx_config_reserved_resources. The modules are: - mpsl - nrfe Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no> Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no> Co-authored-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no> Signed-off-by: Eivind Jølsgard <eivind.jolsgard@nordicsemi.no> Signed-off-by: Aleksandar Stanoev <aleksandar.stanoev@nordicsemi.no> Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no> (cherry picked from commit 5566637)
…targets. Mesh currently works with trusted storage on real targets. Until secure storage is supported by default disable it. Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no> (cherry picked from commit 35fcd6e)
…Cracen driver on nRF54H20 A larger stack is needed to accomodate the Cracen driver. Signed-off-by: Gordon Klaus <gordon.klaus@nordicsemi.no> (cherry picked from commit 4797b5f)
This commit brings back modifications from these reverted commits: - f68b2ed - e606246 slightly adjusted so that the EXMIF peripheral is still by default handled by the mspi_dw driver, and in cases where this driver cannot be used because something still does not work correctly, one can switch to the old solution based on the tweaked spi_dw driver. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no> (cherry picked from commit 5878b1b)
Update Kconfig options for qualification: - Remove experimental on qualified feature. - Add experimental on unqualified feature. - BT_L2CAP_ECRED is not marked as experimental upstream and we qualify it downstream. Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no> Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no> Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no> Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no> Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no> Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no> Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no> Signed-off-by: Herman Berget <herman.berget@nordicsemi.no> Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no> Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no> (cherry picked from commit f23942a)
The PSA is a cryptographically secure random number generator. It will be enabled by default, eventually, For now, enable it manually. Signed-off-by: Gordon Klaus <gordon.klaus@nordicsemi.no> Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no> (cherry picked from commit 60e3e91)
Necessary changes for NCS CI. - Add a Jenkinsfile - Add a commit-tags workflow: This enables sauce tag checking in sdk-zephyr - compliance.yml: Disable check for merge commits, since we have upmerges downstream. Also, since in the code we refer to Kconfig symbols that are defined in the sdk-nrf repository, the Kconfig checks ((SysBuild)Kconfig, (SysBuild)KconfigBasic and (SysBuild)KconfigBasicNoModules) will not pass so exclude them. Also, disable any maintainers-related checks - scripts/gitlint: Extend the max commit line lengths for Gitlint to account for sauce tags - Adapt to the changes in: nrfconnect/action-commit-tags#4 Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no> Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no> Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no> Signed-off-by: Krishna T <krishna.t@nordicsemi.no> Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no> (cherry picked from commit 7de0c84)
Adds symbols used in NCS to the sysbuild Kconfig allow list Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no> (cherry picked from commit 666ffc1)
Add boards/nordic/**/* to the CI-boot-test scope and remove SUIT labels. Signed-off-by: Robert Stypa <robert.stypa@nordicsemi.no> (cherry picked from commit f2b86e0)
Fixed board page in zephyr. Signed-off-by: Richa Pandey <richa.pandey@nordicsemi.no> (cherry picked from commit 3b01d33)
Enable the `empty_app_core` image when building for `cpurad`. Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no> (cherry picked from commit bc0141c)
The xiao_ble boards ship with a bootloader requiring an app offset of 0x27000. The upstream board defines this via DT partitions, which will not be used if partition manager is enabled. Add a static partition configuration to allow binaries built for this board to work out-of-the-box in NCS, and match the behavior with sysbuild disabled. Signed-off-by: Aleksandar Stanoev <aleksandar.stanoev@nordicsemi.no> (cherry picked from commit 0128a91)
Ref: NCSDK-34052 Signed-off-by: Krzysztof Szromek <krzysztof.szromek@nordicsemi.no> (cherry picked from commit 23af03a)
Add support for nRF91x by providing overlay configuration file. Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no> Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no> (cherry picked from commit 3f93b67)
Non-secure variants for nRF7002 DK were removed from upstream in commit 10d4973. Revert these changes downstream, so that the NS variants are still available. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no> Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no> (cherry picked from commit 3f9d391)
This patch backports the nrf9131ek to a time before tfm was refactored. To be reverted when TF-M is updated. Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no> (cherry picked from commit 91df299)
Increased stack sizes for mesh provisoner sample. Values are based of thread analysis, plus added margin. Signed-off-by: Stine Åkredalen <stine.akredalen@nordicsemi.no> (cherry picked from commit abe30cf)
noup because it's about partition manager. Fix the build of secure_storage.psa.its.secure_storage.store.zms on nrf54l15dk/nrf54l15/cpuapp by disabling partition manager, which is incompatible with the ZMS implementation of the ITS store module. Disabling it only for that test as it's not needed for the others and even makes the NS board targets fail if disabling PM. Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no> (cherry picked from commit 5fe83a2)
ZMS legacy enabled by CONFIG_SETTINGS_ZMS_LEGACY uses a different lookup cache function that is optimized for Settings subsystem. Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com> (cherry picked from commit 56d74c7)
This patch should be dropped as part of the next upmerge. The upcoming release of IronSide SE no longer disables RETAIN in all GPIO instances on boot, so the application must be able to handle the hardware default state of RETAIN being enabled. The GPIO retention is properly handled by changes that are currently only upstream and will be pulled in by the next upmerge. This patch exists a workaround to be able to integrate IronSide SE before the proper solution is pulled in. Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no> (cherry picked from commit fa2b950)
Allows listing sysbuild Kconfigs for SoCs Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no> (cherry picked from commit 488c9ff)
Previously reopening of PR did not reopen manifest PR. This commit will enable reopening of manifest PR in such case. Signed-off-by: Kari Hamalainen <kari.hamalainen@nordicsemi.no> (cherry picked from commit 473385a)
The definitions of slot partitions and sram partition has been moved. Include corresponding headers. Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no> (cherry picked from commit c82c428)
Adds an override to force this Kconfig to 0 when partition manager is enabled Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no> (cherry picked from commit cf7c4d3)
Adds undefined Kconfigs used in NCS to the allow list for Kconfig compliance checks Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no> (cherry picked from commit fe5d6ad)
Adds the NCS release notes folder to the exclusion list for undefined Kconfigs so that old Kconfigs can be used e.g. for old release notes, and lwm2m carrier library changelog. Also adds a nrf7x page which details setup instructions for software on Linux Excludes bare metal release docs from the invalid Kconfig check as these will have old Kconfigs that have been removed Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no> Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no> (cherry picked from commit 74ca5f8)
Added support for hardening decision on resume from S2RAM by MCUboot bootloader. Application sets additional variable to MCUBOOT_S2RAM_RESUME_MAGIC which allows the bootloader to doublecheck. Extended mcuboot_resume_s suture by slot_info field intended to be used by MCUboot for recognize proper boot slot in direct-xp mode. Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no> Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no> (cherry picked from commit 8b6ec77)
By default, the BLE stack calls sent callback for ATT data when the data is passed to BLE controller for transmission. Enabling this Kconfig option delays calling the sent callback until data transmission is finished by BLE controller (the callback is delayed until receiving the Number of Completed Packets HCI Event). If the ATT sent callback is delayed until data transmission is done by BLE controller, the transmitted buffer may have an additional reference. The reference is used to extend lifetime of the net buffer until the data transmission is confirmed by ACK of the remote. Jira: NCSDK-27422 Jira: NCSDK-28624 Jira: NCSDK-35650 Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no> (cherry picked from commit 44a4659)
…or flash driver Test SPI NOR flash driver ability to hande the 'supply-gpios' property. Signed-off-by: Bartosz Miller <bartosz.miller@nordicsemi.no> (cherry picked from commit 08250dc)
This reverts commit e5618fe. Configuration introduced by this commit to be moved to sdk-nrf. Signed-off-by: Anton Zyma <anton.zyma@nordicsemi.no>
This reverts commit 206c0ef. Changes introduced by this commit to be moved to sdk-nrf. Signed-off-by: Anton Zyma <anton.zyma@nordicsemi.no>
…ide" This reverts commit bc38fb0. Signed-off-by: Dag Erik Gjørvad <dag.erik.gjorvad@nordicsemi.no>
When TF-m is enabled on 54L the ROM_START_OFFSET should not be overridden, even if MCUboot is enabled. Signed-off-by: Dag Erik Gjørvad <dag.erik.gjorvad@nordicsemi.no> (cherry picked from commit 46d1934)
Adds an override to force this Kconfig to 0 when partition manager is enabled Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no> (cherry picked from commit cf7c4d3)
…ooth version 6.3 Add definition and decoding for version 6.3. Relates to zephyrproject-rtos/zephyr#109050 Upstream PR #: 109050 Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
…family Add handling of the nrf92 chip family to a conditional statement. The nrf92 family is similar to the nrf54h20 chip. Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no> (cherry picked from commit 9702da9)
…nrf7120 Enable flash negative test for nrf7120. Enable sample soc_flash_nrf for nrf7120. Signed-off-by: Travis Lam <travis.lam@nordicsemi.no> (cherry picked from commit c171ef8)
… modes When FLASH_USES_MAPPED_PARTITION is enabled, Kconfig skips FLASH_LOAD_OFFSET and FLASH_LOAD_SIZE. However, the linker scripts only used the DT-based ROM_ADDR/ROM_SIZE path when both FLASH_USES_MAPPED_PARTITION and CONFIG_XIP were set. For non-XIP modes (e.g. MCUboot ram_load), the code fell through to the else branch relying on the missing configs, causing ROM_SIZE to underflow to 0xFFFFFFFFFFFFFFFF and a linker overflow error. Fix by checking only FLASH_USES_MAPPED_PARTITION for ROM_SIZE, and handling ROM_ADDR separately for XIP (DT address) vs non-XIP (RAM_ADDR). Signed-off-by: Albort Xue <yao.xue@nxp.com> (cherry picked from commit 1cf0cc2)
The current default stack space for net_mgmt thread is 800 bytes and it can be too small in some boards like nrf5340dk/nrf5340/cpuapp like shown in this log. Increase the stack to 1024 so that we avoid updating the value in near future. Running TESTSUITE dhcpv6_tests =================================================================== START - test_confirm_exchange_after_iface_down E: ***** USAGE FAULT ***** E: Stack overflow (context area not valid) E: r0/a1: 0x00010fc4 r1/a2: 0x01000000 r2/a3: 0x00000020 E: r3/a4: 0x200022a8 r12/ip: 0x00000020 r14/lr: 0x20003088 E: xpsr: 0x00011400 E: Faulting instruction address (r15/pc): 0x200030b8 E: >>> ZEPHYR FATAL ERROR 2: Stack overflow on CPU 0 E: Current thread: 0x20000d88 (net_mgmt) E: Halting system Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no> (cherry picked from commit 46f59b0) Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
…et_defaults The previous documentation was confusing. This adds much clearer language. Signed-off-by: Timothy Keys <timothy.keys@nordicsemi.no> (cherry picked from commit 237dcf2)
…r ppib121 ppib121 node was missing offset that need to be applied when setting up a connection between DPPI130 and DPPI120. Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no> (cherry picked from commit 70ac296)
Use feature Kconfig instead of SoC Kconfig to determine initialization priority as SD2PPI is not unique to only a single SoC. Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no> (cherry picked from commit 61271f7)
Use DPPIC nodes to detect if certain SPU associated with that DPPIC is present. NRF_SPUxxx defines are created even if SPU instances are not present. Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no> (cherry picked from commit 2fc1f87)
If SD2PPI configuration for GPPI is used, it indicates that external function for configuring PPIB need to be used. Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no> (cherry picked from commit 55450ea)
Raw TX data path already handle proper counting of errors in TX, do not double count. Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no> (cherry picked from commit 080b4f4)
Add statistics tracking for raw/packet sockets (AF_PACKET), following the same pattern as existing UDP and TCP statistics. This tracks packet counts (sent, received, dropped) and byte counts for raw socket traffic. The new CONFIG_NET_STATISTICS_RAW Kconfig option is enabled by default when CONFIG_NET_SOCKETS_PACKET is active. Statistics are updated in the AF_PACKET send path (net_context.c) and the packet socket delivery path (connection.c). Includes NET_MGMT user API support, periodic output, and Prometheus metrics integration. Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no> Assisted-by: Cursor:opus-4.6 (cherry picked from commit 33d6ac9)
Display raw packet socket statistics (recv, sent, drop, bytes) in the "net stats" shell command output. This follows the same display format as the existing UDP and TCP statistics sections. Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no> Assisted-by: Cursor:opus-4.6 (cherry picked from commit fb69902)
Pull fixes for handling raw modes in VIF add/del/change. Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no> (cherry picked from commit fe8bb65)
1.Add host-configurable option to control UMAC behavior when reaching max display BSS limit (toggle between terminating scan or prioritizing by best RSSI). 2.RPU Version update from 1.2.14.8 to 1.2.14.9.i 3.Revert "Race free sleep design", It is affecting the Throughput in Wi-Fi. The changes will be added as Enhancement later. Signed-off-by: Karun Kumar Eagalapati <karun.kumar@nordicsemi.no> (cherry picked from commit 1d32d66)
…epends on BSS limit Add Kconfig to abort the display scan when the BSS limit is reached. Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no> (cherry picked from commit f53d66d)
…fter warm reboot After sys_reboot or debugger reset on nRF54LM20, USB controller fails to initialize because the VREGUSB peripheral retains state across warm resets. Two issues are addressed: 1. Stale VBUS_DETECTED/VBUS_REMOVED events from the previous boot remain set in the event registers. When interrupts are enabled without clearing them first, the ISR fires immediately with potentially wrong event type (VBUS_REMOVED can overwrite VBUS_DETECTED in the handler). 2. When USB cable stays connected across a reboot, no new VBUS_DETECTED edge occurs because the peripheral was never stopped. The regulator callback never fires, so the wrapper never posts NRF_USBHS_PHY_READY, and usbhs_enable_core() blocks indefinitely or times out. Fix by clearing stale events before enabling interrupts, and by reading the undocumented STATUS register (base + 0x400, bit 2) after TASK_START to detect VBUS-already-present and synthesize the REGULATOR_VOLTAGE_DETECTED callback. This matches the approach used in the original inline vendor quirks added in commit 66b938f ("drivers: udc_dwc2: Add nRF54LM20A vendor quirks") before the refactoring to a separate regulator driver. Signed-off-by: Aleksander Strzebonski <aleksander.strzebonski@nordicsemi.no> (cherry picked from commit f72c0cd)
For PEAP-MSCHPv2 and TTLS-MSCHAPv2, client certificate is not expected by RADIUS server and may cause connection failure. Avoid loading cert blobs for these two security methods. Fixes SHEL-4096. Upstream PR #: 108870 Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Fix indentation issues. Upstream PR #: 108870 Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Recent changes increased stack usage in the P2P path, causing stack overflow issues. Adjust memory allocation to handle the increased stack requirements. Signed-off-by: Triveni Danda <triveni.danda@nordicsemi.no> (cherry picked from commit 2521857)
Update hal_nordic revision to contain nrfs changes. The changes enable the low voltage detector usage. Signed-off-by: Kimmo Puusaari <kimmo.puusaari@nordicsemi.no> (cherry picked from commit 1c1007d)
… tester Adding BTP_GAP_PAWR_CONFIGURE command to be able support the following PAwR tests. Required for following test cases: GAP/PADV/PAM/BV-02-C GAP/PADV/PASM/BV-02-C GAP/PADV/PAST/BV-03-C GAP/PADV/PAST/BV-04-C Signed-off-by: alperen sener <alperen.sener@nordicsemi.no> (cherry picked from commit 51dac1a) Signed-off-by: Alperen Sener <alperen.sener@nordicsemi.no>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
… tester
Adding BTP_GAP_PAWR_CONFIGURE command to be able support the following PAwR tests.
Required for following test cases:
GAP/PADV/PAM/BV-02-C
GAP/PADV/PASM/BV-02-C
GAP/PADV/PAST/BV-03-C
GAP/PADV/PAST/BV-04-C
(cherry picked from commit 51dac1a)