Gryfsmart.markdown #37355
Gryfsmart.markdown #37355
Conversation
✅ Deploy Preview for home-assistant-docs ready!
To edit notification comments on pull requests, go to your Netlify site configuration. |
|
Warning Rate limit exceeded@karlowiczpl has exceeded the limit for the number of commits or files that can be reviewed per hour. Please wait 16 minutes and 2 seconds before requesting another review. ⌛ How to resolve this issue?After the wait time has elapsed, a review can be triggered using the We recommend that you space out your commits to avoid hitting the rate limit. 🚦 How do rate limits work?CodeRabbit enforces hourly rate limits for each developer per organization. Our paid plans have higher rate limits than the trial, open-source and free plans. In all cases, we re-allow further reviews after a brief timeout. Please see our FAQ for further information. 📒 Files selected for processing (1)
📝 WalkthroughWalkthroughThe commit introduces a new integration documentation file for Home Assistant, detailing the Gryfsmart integration. The document explains configuration via both YAML and UI-based Config Flow methods. It outlines integration metadata, including release version, supported categories, device classes, and configuration options such as local pushing and hub integration. The documentation describes supported functions (Relay Output, Input, PWM, Temperature Input, Cover Output), provides configuration examples, and explains the creation of helper entities for incoming and outgoing messages. It also notes that a reload is required for changes to take effect. Changes
Sequence Diagram(s)sequenceDiagram
participant U as User
participant HA as Home Assistant
participant GS as Gryfsmart Integration
participant D as Device
U->>HA: Initiate integration setup (YAML/Config Flow)
HA->>GS: Load configuration details
GS->>D: Establish communication (RS-232/USB)
D-->>GS: Return device status/data
GS->>HA: Generate helper entities (gryf_in, gryf_out)
HA->>U: Complete setup and activate integration
Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media? 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (7)
source/_integrations/gryfsmart.markdown (7)
1-25: YAML Front Matter is Well-Structured
The metadata block is clear and aligns with Home Assistant’s documentation standards. One minor suggestion: consider verifying that naming is consistent between fields (for example, using "Binary sensor" in ha_category versus "binary_sensor" in ha_platforms) if consistency is desired.
26-28: Integration Title and Introduction Consistency
The title and introductory text are clear; however, note that the document uses both “Gryfsmart” and “GRYFSMART” (or “GRYF_SMART”). For consistency across the documentation, please standardize the naming (and any use of underscores or capitalization) for the integration.🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
26-26: Multiple top-level headings in the same document
null(MD025, single-title, single-h1)
30-39: Clarify the “How to Use the ID” Section
The explanation of the ID—comprising the driver ID and cell number—is useful. That said, the presence of the placeholder text “XY” might be confusing to end users if left in production. Additionally, the bullet points (listing “- X is the driver ID” and “- Y is the cell number”) could benefit from adjusting their indentation (i.e. starting at the left margin and making sure they’re surrounded by blank lines) to satisfy markdown lint recommendations.🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
37-37: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
37-37: Lists should be surrounded by blank lines
null(MD032, blanks-around-lists)
38-38: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
79-88: Streamline Switch Entity Details
In the Switch section, both “Configuration scheme: device class” and “Device class: switch, outlet” are listed. This repetition could be streamlined to reduce redundancy. Consider merging or rephrasing these details to enhance clarity.🧰 Tools
🪛 LanguageTool
[grammar] ~85-~85: This phrase is duplicated. You should probably use “device class” only once.
Context: ...e:** switch - Configuration scheme: device class - Device class: switch, outlet - **Default device cl...(PHRASE_REPETITION)
106-115: Binary Input Entity Details Could be Simplified
The Binary Input section is clear; however, similar to the Switch section, the repeated mention of “device class” might be simplified. Consider rephrasing these details to avoid duplication.🧰 Tools
🪛 LanguageTool
[grammar] ~112-~112: This phrase is duplicated. You should probably use “device class” only once.
Context: ...nary_sensor - Configuration scheme: device class - Device class: door, garage_door, heat, light, moti...(PHRASE_REPETITION)
172-180: Configuration Schemes Guidelines are Clear
The instructions regarding naming conventions and the uniqueness of the “gryfsmart:” key are clear. As a minor suggestion, ensure that list formatting (including surrounding blank lines) adheres to markdownlint guidelines.🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
175-175: Lists should be surrounded by blank lines
null(MD032, blanks-around-lists)
30-207: Markdown Formatting Adjustments Recommended
Several static analysis tools have flagged minor markdown lint issues:
• Unordered list indentation (for example, in the “How to Use the ID” section, ensure that bullets like “- X is the driver ID” start at the correct column and are surrounded by blank lines).
• Lists should be surrounded by blank lines (per MD032) to improve readability.
• Remove any extraneous trailing spaces (noted around line 94).
These are minor formatting nitpicks that, if addressed, will improve overall document consistency.🧰 Tools
🪛 LanguageTool
[grammar] ~85-~85: This phrase is duplicated. You should probably use “device class” only once.
Context: ...e:** switch - Configuration scheme: device class - Device class: switch, outlet - **Default device cl...(PHRASE_REPETITION)
[grammar] ~112-~112: This phrase is duplicated. You should probably use “device class” only once.
Context: ...nary_sensor - Configuration scheme: device class - Device class: door, garage_door, heat, light, moti...(PHRASE_REPETITION)
🪛 markdownlint-cli2 (0.17.2)
37-37: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
37-37: Lists should be surrounded by blank lines
null(MD032, blanks-around-lists)
38-38: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
94-94: Trailing spaces
Expected: 0 or 2; Actual: 1(MD009, no-trailing-spaces)
104-104: Lists should be surrounded by blank lines
null(MD032, blanks-around-lists)
175-175: Lists should be surrounded by blank lines
null(MD032, blanks-around-lists)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/gryfsmart.markdown(1 hunks)
🧰 Additional context used
🪛 LanguageTool
source/_integrations/gryfsmart.markdown
[grammar] ~85-~85: This phrase is duplicated. You should probably use “device class” only once.
Context: ...e:** switch - Configuration scheme: device class - Device class: switch, outlet - **Default device cl...
(PHRASE_REPETITION)
[grammar] ~112-~112: This phrase is duplicated. You should probably use “device class” only once.
Context: ...nary_sensor - Configuration scheme: device class - Device class: door, garage_door, heat, light, moti...
(PHRASE_REPETITION)
🪛 markdownlint-cli2 (0.17.2)
source/_integrations/gryfsmart.markdown
26-26: Multiple top-level headings in the same document
null
(MD025, single-title, single-h1)
37-37: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
37-37: Lists should be surrounded by blank lines
null
(MD032, blanks-around-lists)
38-38: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
94-94: Trailing spaces
Expected: 0 or 2; Actual: 1
(MD009, no-trailing-spaces)
104-104: Lists should be surrounded by blank lines
null
(MD032, blanks-around-lists)
175-175: Lists should be surrounded by blank lines
null
(MD032, blanks-around-lists)
⏰ Context from checks skipped due to timeout of 90000ms (3)
- GitHub Check: Redirect rules - home-assistant-docs
- GitHub Check: Header rules - home-assistant-docs
- GitHub Check: Pages changed - home-assistant-docs
🔇 Additional comments (12)
source/_integrations/gryfsmart.markdown (12)
40-55: Communication Instructions are Clear
The section detailing how to establish a connection (including using RS-232 or a USB/RS-232 converter) is well explained with useful code blocks. No changes are necessary.
56-60: Module Count Explanation is Concise
The brief explanation regarding the module count is clear and to the point.
60-69: Entities Overview is Informative
The introduction of the five supported functions in the GRYFSMART driver is presented in a clear, bulleted format that makes it easy to understand.
70-78: Light Entity Details are Well-Documented
The section on the Light entity clearly outlines the type, supported services, icon, entity type, configuration scheme, and device class.
89-105: Thermostat Entity Details are Comprehensive
The Thermostat section effectively documents the combined functionality (Relay Output and Temperature Input) and provides a helpful YAML code sample.🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
94-94: Trailing spaces
Expected: 0 or 2; Actual: 1(MD009, no-trailing-spaces)
104-104: Lists should be surrounded by blank lines
null(MD032, blanks-around-lists)
116-124: PWM Entity Documentation is Clear
The PWM section lists all relevant attributes and is both clear and concise.
125-133: Thermometer Entity Documentation is Clear
The configuration details for the Thermometer (Temperature Input) are well-presented and unambiguous.
134-144: Input Entity Extra Information is Helpful
The note on how short and long presses affect sensor state is useful additional information.
145-171: YAML Configuration Example is Comprehensive
The provided YAML example clearly demonstrates how to set up the integration via YAML, covering various device types and configuration parameters.
181-198: Classic and Device Class Schemes Examples are Well-Illustrated
The code examples for both the Classic Scheme and Device Class Scheme effectively demonstrate the correct configuration structure.
200-203: Config Flow Instructions are Clear
The detailed explanation on how the “extra” parameter is used (including its mapping to t_id for thermostats) and the reminder to reload the integration after changes are well stated.
204-207: Helper Entities Documentation is Informative
The description of the automatically generated helper entities (gryf_in and gryf_out) is clear and provides users with useful context.
home-assistant
bot
added
in-progress
|
It seems that this PR is targeted against an incorrect branch. Documentation updates which apply to our current stable release should target the |
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (4)
source/_integrations/gryfsmart.markdown (4)
36-43: Clarify and Format the ID Example
The explanation that the ID is a combination of the driver ID and the cell number is clear; however, the example shown as “17” could be expanded for clarity. Consider rewriting it as:
Example: "17" (where 1 is the driver ID and 7 is the cell number).
Additionally, adding punctuation (e.g., a period at the end of each bullet) may improve consistency and readability.🧰 Tools
🪛 LanguageTool
[uncategorized] ~42-~42: A period might be missing here.
Context: ...7 - 1 is the driver ID - 7 is the cell number ### 1.2 Communication To connect gryf...(AI_EN_LECTOR_MISSING_PUNCTUATION_PERIOD)
85-94: Switch Function Documentation: Minor Redundancy Noted
The section for switches is thorough; however, the phrase related to “device class” appears twice (once under the configuration scheme and again as a separate item). Consider merging or rephrasing for clarity (for example, combine the configuration scheme with the device class details in a single bullet or sentence).🧰 Tools
🪛 LanguageTool
[grammar] ~91-~91: This phrase is duplicated. You should probably use “device class” only once.
Context: ...switch - Configuration scheme: with device class - Device class: switch, outlet - **Default device cl...(PHRASE_REPETITION)
114-124: Binary Input Section: Consider Streamlining Phrasing
Similar to the Switch section, the term “with device class” is used in both the configuration scheme and the device class listing. Condensing these details may help reduce redundancy without losing the necessary information.🧰 Tools
🪛 LanguageTool
[grammar] ~120-~120: This phrase is duplicated. You should probably use “device class” only once.
Context: ...sensor - Configuration scheme: with device class - Device class: door, garage_door, heat, light, moti...(PHRASE_REPETITION)
212-219: Config Flow Instructions: Consider a Minor Punctuation Adjustment
The sentence beginning at line 214 ("The 'extra' parameter corresponds to the device_class if it exists. In the case of a thermostat, the 'extra' parameter maps to t_id instead.") might benefit from a comma for improved readability. For example, rephrase as:
"The 'extra' parameter corresponds to the device_class if it exists, and in the case of a thermostat, it maps to t_id instead."🧰 Tools
🪛 LanguageTool
[uncategorized] ~214-~214: Possible missing comma found.
Context: ...ra" parameter corresponds to the device_class if it exists. In the case of a thermost...(AI_HYDRA_LEO_MISSING_COMMA)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/gryfsmart.markdown(1 hunks)
🧰 Additional context used
🪛 LanguageTool
source/_integrations/gryfsmart.markdown
[uncategorized] ~42-~42: A period might be missing here.
Context: ...7 - 1 is the driver ID - 7 is the cell number ### 1.2 Communication To connect gryf...
(AI_EN_LECTOR_MISSING_PUNCTUATION_PERIOD)
[grammar] ~91-~91: This phrase is duplicated. You should probably use “device class” only once.
Context: ...switch - Configuration scheme: with device class - Device class: switch, outlet - **Default device cl...
(PHRASE_REPETITION)
[grammar] ~120-~120: This phrase is duplicated. You should probably use “device class” only once.
Context: ...sensor - Configuration scheme: with device class - Device class: door, garage_door, heat, light, moti...
(PHRASE_REPETITION)
[uncategorized] ~214-~214: Possible missing comma found.
Context: ...ra" parameter corresponds to the device_class if it exists. In the case of a thermost...
(AI_HYDRA_LEO_MISSING_COMMA)
🔇 Additional comments (15)
source/_integrations/gryfsmart.markdown (15)
1-24: YAML Front Matter is Well-Structured
The integration metadata (title, description, release, categories, etc.) is clearly defined and adheres to Home Assistant documentation standards.
44-61: Communication Details Section is Clear
The instructions for connecting via RS-232 or USB/RS-232 converter are concise and include relevant command examples for listing devices.
62-65: Module Count Section is Concise and Informative
The brief explanation of the module count is sufficient.
66-75: Entities Overview is Complete
The list of supported function types for the gryfsmart driver is well presented and easy to follow.
76-84: Light Function Documentation Looks Good
The details for Relay Output—specifically for lights—are appropriately detailed, including services, icon, and configuration scheme.
95-113: Thermostat Function Documentation Check
The thermostat section and accompanying YAML snippet are clear. Please verify that the YAML code block is properly closed with matching backticks. If the closing fence isn’t clearly visible after the snippet (line 107), ensure it is added for proper Markdown rendering.
125-133: PWM Function Section is Well-Documented
The explanation for PWM, including supported services and configuration details, is clear and concise.
134-142: Thermometer Function Section Approved
The details provided for the Temperature Input function (thermometer) are sufficient and clearly organized.
143-154: Input Function Section is Clear
The documentation for Input, including the extra information regarding sensor states, is detailed and well presented.
155-156: YAML Configuration Introduction is Well-Written
The introductory lines for configuring via YAML transition smoothly from the integration overview.
157-181: Example Configuration Tree is Detailed and Informative
The YAML snippet provided as an example is comprehensive, correctly indented, and gives a clear view of how to structure the configuration.
182-192: Configuration Schemes Overview is Clear
The section outlining configuration schemes robustly covers naming conventions, parameter formats, and key requirements.
193-201: Classic Scheme Example is Sufficient
The provided YAML snippet under the Classic Scheme clearly demonstrates the expected configuration with appropriate comments.
202-211: Device Class Scheme Example is Clear
The YAML example for the “With Device Class” scheme is well structured and detailed.
220-226: Helper Entities Section is Clear and Informative
The explanation describing the automatically generated helper entities (gryf_in and gryf_out) is concise and provides useful context for users.
home-assistant
bot
removed
the
needs-rebase
c0ffeeca7
added
the
new-integration
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (3)
source/_integrations/gryfsmart.markdown (3)
32-43: Clarify the ID Example
The explanation in the "How to Use the ID" section is clear. However, the sample value “17” (line 39) could be ambiguous to readers. Consider clarifying—perhaps by explaining that it represents a concatenation of the driver ID (1) and the cell number (7) or by formatting it as a code snippet to emphasize the intended result.
129-130: Fix Excessive Blank Lines
There are multiple consecutive blank lines here which may trigger markdownlint (MD012) warnings. Reducing them to a single blank line would enhance the document’s formatting.Suggested Diff:
- - +🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
129-129: Multiple consecutive blank lines
Expected: 1; Actual: 2(MD012, no-multiple-blanks)
130-130: Multiple consecutive blank lines
Expected: 1; Actual: 3(MD012, no-multiple-blanks)
131-145: Section Numbering Inconsistency
The document jumps from section 2 ("Configuration via Config Flow") directly to section 4 ("Helper Entities"), with no section 3 present. If this omission is intentional, a brief note might help clarify; otherwise, consider renumbering the sections sequentially for improved clarity.
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/gryfsmart.markdown(1 hunks)
🧰 Additional context used
🪛 markdownlint-cli2 (0.17.2)
source/_integrations/gryfsmart.markdown
129-129: Multiple consecutive blank lines
Expected: 1; Actual: 2
(MD012, no-multiple-blanks)
130-130: Multiple consecutive blank lines
Expected: 1; Actual: 3
(MD012, no-multiple-blanks)
⏰ Context from checks skipped due to timeout of 90000ms (4)
- GitHub Check: Redirect rules - home-assistant-docs
- GitHub Check: Header rules - home-assistant-docs
- GitHub Check: Pages changed - home-assistant-docs
- GitHub Check: Lint Text
🔇 Additional comments (7)
source/_integrations/gryfsmart.markdown (7)
1-24: Excellent Front Matter!
The YAML front matter is comprehensive and correctly adheres to Home Assistant’s documentation standards. All necessary metadata fields are provided.
26-31: Clear Integration Introduction
The header and introductory text clearly describe the purpose of the document and the dual configuration methods (YAML and UI-based Config Flow).
44-49: Communication Section Looks Good
The instructions on establishing a connection (via Physical RS-232 or USB/RS-232 converter) are clear and concise.
50-53: Module Count Section is Clear
The brief explanation regarding the module count in the network is succinct and easily understood.
54-128: Comprehensive Entity Configuration
The detailed breakdown of all supported functions (Light, Switch, Thermostat, Binary Input, PWM, Thermometer, Input) is very thorough. Each entity’s configuration details—including services, icons, entity types, and device classes—are well documented and should greatly aid users in setting up the integration.
131-138: Clear Config Flow Instructions
The "Configuration via Config Flow" section clearly explains parameter mapping and highlights that a reload is required after configuration changes.
139-145: Well Documented Helper Entities
The explanation of the two helper entities (gryf_in and gryf_out) is clear and helpful—especially for less experienced installers.
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (5)
source/_integrations/gryfsmart.markdown (5)
26-27: Ensure Proper Heading SpacingAccording to markdownlint’s MD022, headings should be surrounded by blank lines. Consider inserting a blank line before and after the headings at lines 26 and 27.
🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
26-26: Headings should be surrounded by blank lines
Expected: 1; Actual: 0; Below(MD022, blanks-around-headings)
26-26: Multiple top-level headings in the same document
null(MD025, single-title, single-h1)
27-27: Headings should be surrounded by blank lines
Expected: 1; Actual: 0; Above(MD022, blanks-around-headings)
🪛 GitHub Actions: home-assistant.io Test
[error] 27-27: Incorrect usage of the term: “home assistant”, use “Home Assistant” instead terminology
29-29: Consistent RS-232 NotationFor consistency throughout the document, replace "RS232" with "RS-232" in the interface description.
-... and requires RS232 interface. +... and requires RS-232 interface.
55-61: Consistent Formatting in Bullet ListIn the function list, the item Cover Output(S) is missing a space between "Output" and "(S)". Align its formatting with the other items by inserting the missing space.
- - **Cover Output(S)** + - **Cover Output (S)**
128-129: Remove Excessive Blank LinesMultiple consecutive blank lines have been detected around lines 128–129. Please remove the extra blank lines so that only a single blank line remains, in line with MD012 guidelines.
🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
128-128: Multiple consecutive blank lines
Expected: 1; Actual: 2(MD012, no-multiple-blanks)
129-129: Multiple consecutive blank lines
Expected: 1; Actual: 3(MD012, no-multiple-blanks)
131-132: Clarify Sentence Structure in Configuration SectionThe sentence explaining the "extra" parameter could be clearer. For example, splitting it into two sentences—such as:
"In the case of a thermostat, the 'extra' parameter maps to t_id instead. Otherwise, this parameter is not required."
This improves readability.🧰 Tools
🪛 LanguageTool
[uncategorized] ~132-~132: Possible missing comma found.
Context: ...ra" parameter corresponds to the device_class if it exists. In the case of a thermost...(AI_HYDRA_LEO_MISSING_COMMA)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/gryfsmart.markdown(1 hunks)
🧰 Additional context used
🪛 LanguageTool
source/_integrations/gryfsmart.markdown
[uncategorized] ~132-~132: Possible missing comma found.
Context: ...ra" parameter corresponds to the device_class if it exists. In the case of a thermost...
(AI_HYDRA_LEO_MISSING_COMMA)
🪛 markdownlint-cli2 (0.17.2)
source/_integrations/gryfsmart.markdown
26-26: Headings should be surrounded by blank lines
Expected: 1; Actual: 0; Below
(MD022, blanks-around-headings)
26-26: Multiple top-level headings in the same document
null
(MD025, single-title, single-h1)
27-27: Headings should be surrounded by blank lines
Expected: 1; Actual: 0; Above
(MD022, blanks-around-headings)
128-128: Multiple consecutive blank lines
Expected: 1; Actual: 2
(MD012, no-multiple-blanks)
129-129: Multiple consecutive blank lines
Expected: 1; Actual: 3
(MD012, no-multiple-blanks)
🪛 GitHub Actions: home-assistant.io Test
source/_integrations/gryfsmart.markdown
[error] 27-27: Incorrect usage of the term: “home assistant”, use “Home Assistant” instead terminology
🔇 Additional comments (2)
source/_integrations/gryfsmart.markdown (2)
1-24: YAML Front Matter is Well-StructuredThe metadata block is properly formatted and contains all necessary fields.
138-144: Verify Section Numbering ConsistencyThe document jumps from "## 2. Configuration via Config Flow" to "## 4. Helper Entities" without a section 3. Please confirm if this numbering is intentional or if a section is missing.
There was a problem hiding this comment.
Actionable comments posted: 0
♻️ Duplicate comments (1)
source/_integrations/gryfsmart.markdown (1)
26-26:⚠️ Potential issueCorrect Terminology: Capitalize "Home Assistant"
The header incorrectly uses “home assistant”. Please change it to “Home Assistant” to comply with documentation standards.
-# The [GryfSmart](https://gryfsmart.pl) integration for home assistant allows you to connect to GryfSmart devices +# The [GryfSmart](https://gryfsmart.pl) integration for Home Assistant allows you to connect to GryfSmart devices🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
26-26: Multiple top-level headings in the same document
null(MD025, single-title, single-h1)
🪛 GitHub Actions: home-assistant.io Test
[error] 26-26: Incorrect usage of the term: “home assistant”, use “Home Assistant” instead terminology
🧹 Nitpick comments (3)
source/_integrations/gryfsmart.markdown (3)
28-28: Grammar & Consistency: Verb Agreement and RS-232 NotationIn the sentence “The integration support Config Flow (UI-based setup), and requires RS232 interface.”:
- Use “supports” instead of “support” for proper subject–verb agreement.
- Replace “RS232” with “RS-232” for consistency with later references.
-This document describes how to configure and use the GryfSmart integration. The integration support Config Flow (UI-based setup), and requires RS232 interface. +This document describes how to configure and use the GryfSmart integration. The integration supports Config Flow (UI-based setup), and requires RS-232 interface.
32-38: List Formatting: Adjust Indentation, Link Fragment Case, and Correct SpellingThe unordered list items for the supported device types have extra indentation and the link fragments use capital letters. Also, "Termometer" should be corrected to "Thermometer" to match proper spelling and link consistency.
🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
32-32: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
32-32: Link fragments should be valid
Expected: #141-light; Actual: #141-Light(MD051, link-fragments)
33-33: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
33-33: Link fragments should be valid
Expected: #142-switch; Actual: #142-Switch(MD051, link-fragments)
34-34: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
34-34: Link fragments should be valid
Expected: #143-thermostat; Actual: #143-Thermostat(MD051, link-fragments)
35-35: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
35-35: Link fragments should be valid
Expected: #144-binary-input; Actual: #144-Binary-Input(MD051, link-fragments)
36-36: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
36-36: Link fragments should be valid
Expected: #145-pwm; Actual: #145-PWM(MD051, link-fragments)
37-37: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
37-37: Link fragments should be valid
Expected: #146-thermometer; Actual: #146-Thermometer(MD051, link-fragments)
38-38: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
38-38: Link fragments should be valid
Expected: #147-input; Actual: #147-Input(MD051, link-fragments)
139-140: Formatting: Remove Extra Blank LinesThere are multiple consecutive blank lines around line 139–140. Please reduce them to a single blank line to comply with markdownlint guidelines.
🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
139-139: Multiple consecutive blank lines
Expected: 1; Actual: 2(MD012, no-multiple-blanks)
140-140: Multiple consecutive blank lines
Expected: 1; Actual: 3(MD012, no-multiple-blanks)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/gryfsmart.markdown(1 hunks)
🧰 Additional context used
🪛 markdownlint-cli2 (0.17.2)
source/_integrations/gryfsmart.markdown
26-26: Multiple top-level headings in the same document
null
(MD025, single-title, single-h1)
32-32: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
32-32: Link fragments should be valid
Expected: #141-light; Actual: #141-Light
(MD051, link-fragments)
33-33: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
33-33: Link fragments should be valid
Expected: #142-switch; Actual: #142-Switch
(MD051, link-fragments)
34-34: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
34-34: Link fragments should be valid
Expected: #143-thermostat; Actual: #143-Thermostat
(MD051, link-fragments)
35-35: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
35-35: Link fragments should be valid
Expected: #144-binary-input; Actual: #144-Binary-Input
(MD051, link-fragments)
36-36: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
36-36: Link fragments should be valid
Expected: #145-pwm; Actual: #145-PWM
(MD051, link-fragments)
37-37: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
37-37: Link fragments should be valid
Expected: #146-thermometer; Actual: #146-Thermometer
(MD051, link-fragments)
38-38: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
38-38: Link fragments should be valid
Expected: #147-input; Actual: #147-Input
(MD051, link-fragments)
139-139: Multiple consecutive blank lines
Expected: 1; Actual: 2
(MD012, no-multiple-blanks)
140-140: Multiple consecutive blank lines
Expected: 1; Actual: 3
(MD012, no-multiple-blanks)
🪛 GitHub Actions: home-assistant.io Test
source/_integrations/gryfsmart.markdown
[error] 26-26: Incorrect usage of the term: “home assistant”, use “Home Assistant” instead terminology
🔇 Additional comments (1)
source/_integrations/gryfsmart.markdown (1)
1-24: YAML Front Matter: No Issues DetectedThe front matter block is correctly structured and includes all required metadata.
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (5)
source/_integrations/gryfsmart.markdown (5)
28-28: Improve Grammar and Interface Notation
Replace "support" with "supports" and update "RS232" to "RS-232" for clarity and correctness.-This document describes how to configure and use the GryfSmart integration. The integration support Config Flow (UI-based setup), and requires RS232 interface. +This document describes how to configure and use the GryfSmart integration. The integration supports Config Flow (UI-based setup), and requires RS-232 interface.
66-68: Consistent Naming for Integration
Update the driver name to "GryfSmart" (with appropriate capitalization) for uniformity throughout the document.-**gryfsmart driver supports 5 types of functions:** +**GryfSmart driver supports 5 types of functions:**
70-74: Correct Spacing in Entity Function Name
Ensure proper spacing in "Cover Output (S)" for clarity.- - **Cover Output(S)** + - **Cover Output (S)**
56-59: Ensure Consistent Capitalization in Communication Section
For consistency, change "gryfsmart" to "GryfSmart" and adjust "Physical" to lowercase.-To connect gryfsmart, you can use either a Physical RS-232 connection or a USB/RS-232 converter. +To connect GryfSmart, you can use either a physical RS-232 connection or a USB/RS-232 converter.
143-144: Remove Extra Blank Lines
There are multiple consecutive blank lines; please remove the surplus to comply with markdownlint (MD012).🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
143-143: Multiple consecutive blank lines
Expected: 1; Actual: 2(MD012, no-multiple-blanks)
144-144: Multiple consecutive blank lines
Expected: 1; Actual: 3(MD012, no-multiple-blanks)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/gryfsmart.markdown(1 hunks)
🧰 Additional context used
🪛 markdownlint-cli2 (0.17.2)
source/_integrations/gryfsmart.markdown
32-32: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
33-33: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
34-34: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
35-35: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
36-36: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
37-37: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
38-38: Unordered list indentation
Expected: 0; Actual: 1
(MD007, ul-indent)
143-143: Multiple consecutive blank lines
Expected: 1; Actual: 2
(MD012, no-multiple-blanks)
144-144: Multiple consecutive blank lines
Expected: 1; Actual: 3
(MD012, no-multiple-blanks)
🪛 GitHub Actions: home-assistant.io Test
source/_integrations/gryfsmart.markdown
[error] 26-26: Incorrect usage of the term: “home assistant”, use “Home Assistant” instead terminology
⏰ Context from checks skipped due to timeout of 90000ms (2)
- GitHub Check: Redirect rules - home-assistant-docs
- GitHub Check: Header rules - home-assistant-docs
🔇 Additional comments (3)
source/_integrations/gryfsmart.markdown (3)
1-24: YAML Metadata Block is Correctly Structured
The front matter includes all required keys for integration metadata and follows Home Assistant documentation standards.
26-26: Correct Capitalization for Home Assistant in Header
The header uses "home assistant" in lowercase. Please update it to "Home Assistant" to meet documentation guidelines.-## The [GryfSmart](https://gryfsmart.pl) integration for home assistant allows you to connect to GryfSmart devices +## The [GryfSmart](https://gryfsmart.pl) integration for Home Assistant allows you to connect to GryfSmart devices🧰 Tools
🪛 GitHub Actions: home-assistant.io Test
[error] 26-26: Incorrect usage of the term: “home assistant”, use “Home Assistant” instead terminology
1-159: Overall Documentation Quality
The new integration documentation is comprehensive and well organized. Please address the capitalization, grammar, and formatting issues noted above to maintain consistency and adherence to Home Assistant documentation standards.🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
32-32: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
33-33: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
34-34: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
35-35: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
36-36: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
37-37: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
38-38: Unordered list indentation
Expected: 0; Actual: 1(MD007, ul-indent)
143-143: Multiple consecutive blank lines
Expected: 1; Actual: 2(MD012, no-multiple-blanks)
144-144: Multiple consecutive blank lines
Expected: 1; Actual: 3(MD012, no-multiple-blanks)
🪛 GitHub Actions: home-assistant.io Test
[error] 26-26: Incorrect usage of the term: “home assistant”, use “Home Assistant” instead terminology
There was a problem hiding this comment.
Actionable comments posted: 0
♻️ Duplicate comments (1)
source/_integrations/gryfsmart.markdown (1)
26-26:⚠️ Potential issueCorrect Capitalization for Home Assistant
The heading currently reads:
## The [GryfSmart](https://gryfsmart.pl) integration for home assistant allows you to connect to GryfSmart devicesPlease change “home assistant” to “Home Assistant” to comply with documentation standards and resolve the pipeline failure.
-## The [GryfSmart](https://gryfsmart.pl) integration for home assistant allows you to connect to GryfSmart devices +## The [GryfSmart](https://gryfsmart.pl) integration for Home Assistant allows you to connect to GryfSmart devices🧰 Tools
🪛 GitHub Actions: home-assistant.io Test
[error] 26-26: Incorrect usage of the term: “home assistant”, use “Home Assistant” instead terminology
🧹 Nitpick comments (3)
source/_integrations/gryfsmart.markdown (3)
28-28: Improve Grammar in DescriptionIn the sentence:
This document describes how to configure and use the GryfSmart integration. The integration support Config Flow (UI-based setup), and requires RS232 interface.consider changing “support” to “supports” and inserting an article before “RS232 interface” for improved clarity and grammar. For example:
-This document describes how to configure and use the GryfSmart integration. The integration support Config Flow (UI-based setup), and requires RS232 interface. +This document describes how to configure and use the GryfSmart integration. The integration supports Config Flow (UI-based setup) and requires an RS232 interface.
70-74: Clarify Abbreviation for Cover OutputWithin the note block, the function list includes:
- **Cover Output(S)**The use of “(S)” is not self-explanatory. Please clarify whether this abbreviation indicates a variant or additional detail (for example, if “S” stands for a specific term) or remove it if it is not required.
143-144: Eliminate Excess Blank LinesThere are multiple consecutive blank lines between the “Input” section and the next heading. Please remove the extra blank lines so that only one blank line separates the sections. For example, ensure that the spacing follows the Home Assistant documentation guidelines.
🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
143-143: Multiple consecutive blank lines
Expected: 1; Actual: 2(MD012, no-multiple-blanks)
144-144: Multiple consecutive blank lines
Expected: 1; Actual: 3(MD012, no-multiple-blanks)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/gryfsmart.markdown(1 hunks)
🧰 Additional context used
🪛 markdownlint-cli2 (0.17.2)
source/_integrations/gryfsmart.markdown
143-143: Multiple consecutive blank lines
Expected: 1; Actual: 2
(MD012, no-multiple-blanks)
144-144: Multiple consecutive blank lines
Expected: 1; Actual: 3
(MD012, no-multiple-blanks)
🪛 GitHub Actions: home-assistant.io Test
source/_integrations/gryfsmart.markdown
[error] 26-26: Incorrect usage of the term: “home assistant”, use “Home Assistant” instead terminology
🔇 Additional comments (2)
source/_integrations/gryfsmart.markdown (2)
1-25: Front Matter VerificationThe YAML front matter is well structured and provides all the necessary integration metadata.
32-39: Fix List IndentationThe unordered list for the supported device types appears to have extra indentation. Please remove the unnecessary spaces before each list item to conform to markdown standards. For example:
- - Light - - Switch - - Thermostat - - Binary Input - - PWM - - Thermometer - - Input +- Light +- Switch +- Thermostat +- Binary Input +- PWM +- Thermometer +- InputThis comment duplicates previous feedback on list indentation.
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (4)
source/_integrations/gryfsmart.markdown (4)
26-26: Fix Heading SpacingThere is a missing space between "The" and the linked text as well as between the link and "integration". This can affect readability.
-## The[GryfSmart](https://gryfsmart.pl)integration for Home Assistant allows you to connect to GryfSmart devices +## The [GryfSmart](https://gryfsmart.pl) integration for Home Assistant allows you to connect to GryfSmart devices
28-28: Ensure Consistent RS-232 NotationThe text mentions "RS232 interface" without a hyphen. For consistency and clarity with later mentions (e.g., "RS-232 connection"), it’s recommended to update this to "RS-232 interface."
-This document describes how to configure and use the GryfSmart integration. The integration supports Config Flow (UI-based setup), and requires an RS232 interface. +This document describes how to configure and use the GryfSmart integration. The integration supports Config Flow (UI-based setup), and requires an RS-232 interface.
66-76: Consistent Capitalization for Integration NameWithin the note block, the text "gryfsmart driver supports 5 types of functions:" is used. For brand consistency, consider capitalizing it as "GryfSmart driver supports 5 types of functions:" (i.e. using consistent naming as used elsewhere in the document).
151-156: Consistent Naming in Helper Entities Section and Trailing Newline
- In the Helper Entities section, the description refers to "GRYF SMART installer" while the integration is otherwise styled as "GryfSmart." Consider standardizing the naming across the document.
- Additionally, ensure that the file ends with a single newline character to comply with markdown standards.
🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
156-156: Files should end with a single newline character
null(MD047, single-trailing-newline)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/gryfsmart.markdown(1 hunks)
🧰 Additional context used
🪛 markdownlint-cli2 (0.17.2)
source/_integrations/gryfsmart.markdown
156-156: Files should end with a single newline character
null
(MD047, single-trailing-newline)
⏰ Context from checks skipped due to timeout of 90000ms (3)
- GitHub Check: Redirect rules - home-assistant-docs
- GitHub Check: Header rules - home-assistant-docs
- GitHub Check: Pages changed - home-assistant-docs
🔇 Additional comments (2)
source/_integrations/gryfsmart.markdown (2)
1-24: Metadata Block VerificationThe YAML front matter is well structured, including all the required Home Assistant integration metadata. Everything appears to conform to the documentation standards.
32-38: List of Supported Device TypesThe bullet list for the supported device types is clear and formatted correctly. No issues here.
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (6)
source/_integrations/gryfsmart.markdown (6)
1-24: YAML Front Matter and Metadata Correctness
The front matter block is well-structured and includes all necessary metadata for the integration. One minor suggestion is to ensure that the file ends with a single trailing newline (per MD047) to satisfy markdownlint standards.
26-30: Clear Introductory Heading and Supported Device Types List
The heading and introductory text clearly present the integration’s purpose and effectively list the supported device types. For consistency with branding, please verify that all instances of the integration’s name are capitalized as “GryfSmart” (e.g. ensure that descriptive sentences do not use a lowercase variant).
42-53: Clarify Example in "How to Use the ID" Section
The "How to Use the ID" section is informative; however, the standalone example “17” on line 49 is somewhat ambiguous. Consider formatting it as inline code (for example, using backticks:`17`) or adding a brief explanation so that readers clearly understand that it is an example ID composed of driver ID and cell number.
54-59: Consistent Branding in Communication Section
In the "Communication" section, the integration is referenced as “gryfsmart” (in lowercase). For consistency with the rest of the documentation, please update this to “GryfSmart.”
151-156: Consistent Naming in Helper Entities Description
The section describing helper entities is clear and informative. However, the phrase “if you are not an experienced GRYF SMART installer” uses an all-uppercase styling for “GRYF SMART” which differs from the “GryfSmart” branding used elsewhere. I recommend standardizing the naming to “GryfSmart installer” for a consistent user experience.🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
156-156: Files should end with a single newline character
null(MD047, single-trailing-newline)
156-156: Ensure Trailing Newline at End of File
Per markdownlint's MD047 requirement, please ensure that the file ends with a single trailing newline.🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
156-156: Files should end with a single newline character
null(MD047, single-trailing-newline)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/gryfsmart.markdown(1 hunks)
🧰 Additional context used
🪛 markdownlint-cli2 (0.17.2)
source/_integrations/gryfsmart.markdown
156-156: Files should end with a single newline character
null
(MD047, single-trailing-newline)
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (5)
source/_integrations/gryfsmart.markdown (5)
27-28: Avoid Multiple Consecutive Blank Lines
Static analysis (MD012) reports that there are multiple consecutive blank lines. Please ensure that only one blank line separates sections to meet markdownlint guidelines.🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
28-28: Multiple consecutive blank lines
Expected: 1; Actual: 2(MD012, no-multiple-blanks)
60-62: Module Count Section Could Benefit From Examples
While the explanation is concise, supplementing it with an example of how the module count is used in practice might improve clarity for end users.
101-109: Binary Input Section is Thorough
The Binary Input configuration covers all necessary details. If possible, consider providing additional context on how the icon is chosen for different device classes to further aid the user.
124-133: Input Entity Explanation is Informative
The Input section not only explains the configuration but also provides extra information on the sensor state values. For enhanced clarity, consider adding a brief explanation about what the different sensor states (2 for short press, 3 for long press) imply for the end user.
157-157: Remove Trailing Spaces
Static analysis (MD009) has detected trailing whitespace on line 157. Please remove the extra spaces to conform with markdownlint guidelines.🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
157-157: Trailing spaces
Expected: 0 or 2; Actual: 1(MD009, no-trailing-spaces)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/gryfsmart.markdown(1 hunks)
🧰 Additional context used
🪛 markdownlint-cli2 (0.17.2)
source/_integrations/gryfsmart.markdown
28-28: Multiple consecutive blank lines
Expected: 1; Actual: 2
(MD012, no-multiple-blanks)
157-157: Trailing spaces
Expected: 0 or 2; Actual: 1
(MD009, no-trailing-spaces)
⏰ Context from checks skipped due to timeout of 90000ms (3)
- GitHub Check: Redirect rules - home-assistant-docs
- GitHub Check: Header rules - home-assistant-docs
- GitHub Check: Pages changed - home-assistant-docs
🔇 Additional comments (14)
source/_integrations/gryfsmart.markdown (14)
1-24: YAML Front Matter is Well-Structured
The front matter includes all required keys (such asha_release,ha_category,ha_platforms, etc.) and adheres to Home Assistant’s documentation standards.
26-30: Clear Integration Heading and Overview
The title, description, and introductory text clearly explain the purpose of the GryfSmart integration. The capitalization of “Home Assistant” is correct.🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
28-28: Multiple consecutive blank lines
Expected: 1; Actual: 2(MD012, no-multiple-blanks)
29-40: Device Types List is Complete and Correct
The list of supported device types is clearly laid out and uses the correct names (e.g., “Thermometer” instead of the previously misspelled version).
41-42: Config Flow Inclusion Directive is Correct
The directive to include the Config Flow instructions ({% include integrations/config_flow.md %}) is properly placed and appears to work as expected.
43-50: Concise Explanation of Integration ID Usage
The "How to Use the ID" section clearly explains the concept and provides an example. This makes it easy for the reader to understand the role of the driver ID and cell number.
51-57: Effective Communication Instructions
The "Communication" section details the connection options (physical RS-232 vs. USB/RS-232 converter) and includes typical device paths. This is informative and accurate.
63-75: Informative Note on Entity Functions
The note block listing the five supported function types for the GryfSmart driver is clear and useful for users to quickly grasp the integration’s capabilities.
77-84: Light Entity Details are Clear
The configuration details for the Light entity (e.g., function type, services, icon, entity type) are well-documented.
85-92: Switch Entity Details are Accurate
The Switch entity is described thoroughly, including its default device class and available services.
93-100: Thermostat Entity Information is Detailed
The documentation for the Thermostat entity explains both its dual nature (Relay Output and Temperature Input) and the parameter mapping for Config Flow effectively.
110-116: PWM Entity Details are Concise and Clear
The PWM section clearly outlines the services and configuration, making it straightforward for users to understand.
117-123: Thermometer Entity Documentation is Correct
The details provided for the Thermometer are accurate and the entity type is appropriately set as a sensor.
134-141: Clear Description of Config Flow Setup
This section makes it clear how the “extra” parameter is used, especially noting the special case for thermostats. Reloading the integration after changes is also clearly communicated.
142-148: Helper Entities are Well-Described
The documentation succinctly explains the role of the helper entities (gryf_in and gryf_out) without overwhelming the reader.
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (4)
source/_integrations/gryfsmart.markdown (4)
59-65: Module Count Explanation and Formatting
The module count explanation is clear.
- Nitpick: Please remove any trailing spaces at the end of line 63 to comply with markdownlint (MD009).
🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
63-63: Trailing spaces
Expected: 0 or 2; Actual: 1(MD009, no-trailing-spaces)
80-132: Detailed Device Function Sections
The subsections for Light, Switch, Thermostat, Binary Input, PWM, and Thermometer detail the configuration parameters clearly.
- Suggestion: In the Binary Input section (lines 108-116), consider consolidating the "Device class" list into a single line or reformatting it for greater clarity to avoid splitting the list across two lines.
145-148: Example Formatting for Input Section
The example provided is valuable for understanding the sensor state transitions.
- Refactor Suggestion: Insert a blank line after the "Example:" line (line 145) to improve markdown rendering and satisfy MD032 (lists should be surrounded by blank lines).
🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
146-146: Lists should be surrounded by blank lines
null(MD032, blanks-around-lists)
150-157: Configuration via Config Flow Section
The section provides comprehensive guidance on using the Config Flow setup.
- Nitpick: As indicated by the static analysis hint, consider inserting a comma after "if it exists" on line 152 for improved clarity.
🧰 Tools
🪛 LanguageTool
[uncategorized] ~152-~152: Possible missing comma found.
Context: ...ra" parameter corresponds to the device_class if it exists. In the case of a thermost...(AI_HYDRA_LEO_MISSING_COMMA)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/gryfsmart.markdown(1 hunks)
🧰 Additional context used
🪛 LanguageTool
source/_integrations/gryfsmart.markdown
[uncategorized] ~152-~152: Possible missing comma found.
Context: ...ra" parameter corresponds to the device_class if it exists. In the case of a thermost...
(AI_HYDRA_LEO_MISSING_COMMA)
🪛 markdownlint-cli2 (0.17.2)
source/_integrations/gryfsmart.markdown
63-63: Trailing spaces
Expected: 0 or 2; Actual: 1
(MD009, no-trailing-spaces)
146-146: Lists should be surrounded by blank lines
null
(MD032, blanks-around-lists)
🔇 Additional comments (10)
source/_integrations/gryfsmart.markdown (10)
1-24: YAML Front Matter is Well-Structured
The YAML frontmatter correctly defines all required metadata (title, description, release, categories, etc.) for the new integration. Ensure the list indentations and formatting comply with YAML best practices.
26-29: Title and Description Formatting
The title and description clearly introduce the integration. "Home Assistant" is properly capitalized.
30-39: Supported Device Types List
The list of supported device types (Light, Switch, Thermostat, etc.) is clearly presented. Double-check that the items align with Home Assistant’s standard naming conventions.
40-40: Include Statement for Config Flow
The use of{% include integrations/config_flow.md %}is appropriate for reusing common documentation content. Verify that the referenced file exists and is up to date.
42-52: Integration Information Section
The "Important Integration Information" block, including the explanation for how to use the ID, is clear and concise. Consider adding extra context if needed later, but as it stands, it is adequate.
53-58: Communication Section Clarity
The instructions regarding RS-232 and USB/RS-232 converter connections are straightforward and informative. Verify that the device address examples ("/dev/ttyS0", "/dev/ttyUSB0") remain valid in practical setups.
66-78: Entities and Note Block Formatting
The entities section, highlighted with a note block that lists the 5 supported functions, is well-structured. Confirm that the formatting renders correctly in the final documentation output.
133-144: Input Section Descriptions
The "Input" section, including its extra information on sensor states, is clearly described. The definitions and examples are straightforward and useful.
158-163: Helper Entities Explanation
The explanation regarding the helper entities (gryf_in and gryf_out) is concise and clear. Ensure that this description stays synchronized with any behavioral changes in the integration after configuration reloads.
164-164: Final Line Check
Line 164 appears empty or incomplete. Please ensure that the file ends with a proper newline and that no unintended characters remain.
Proposed change
Type of change
currentbranch).currentbranch).nextbranch).nextbranch).Additional information
Checklist
currentbranch.nextbranch.Summary by CodeRabbit
Summary by CodeRabbit