3d printed enclosure
The first enclosure was made around march 2020, combined with the first versions of this firmware. For technical information about this check here.
Many PortaPacks on AliExpress come with a metal or plastic enclosure. Enclosure dimensions, simplicity of assembly/disassembly, connector labeling (if any), and speaker hole positions (if any) varies by supplier. Some users feel that a metal enclosure is safer for devices that contain LiPo batteries.
You can 3D-print the following enclosure for your Portapack:
Encoder knob:
And the following magnetic cover (consider that most of the commercial cases that clone the design of the enclosure include plastic screws, hence this wont work):
If you do not own a 3d printer, you have other options:
- Weerg for a high quality print
- 3DHubs for a low cost alternative
- Tindie another alternative, with a lot of customization options
- Injection moulded version of the case
If you need a different design, or material, check more options directly in Aliexpress.
For a comparison between the results of the different fabrication techniques, check: https://youtu.be/lB-vc-Y13PM
Check the assembly.pdf from the case files for instructions.
You can easily place a small speaker inside. There is no holes in the case but it seems that the sound quality actually improves with the case: https://www.youtube.com/watch?v=XkaGV9muvbg
Check more details about the speaker (details and wiring) here.
This version includes a new knob, switches and other refined features, while keeping the compact size:
Official case, made for injection molding. Can be 3D printed, but has very tight tolerances.
Upgraded standard case with lower tolerances, more readable text, speaker holes, and a bunch of other minor upgrades.
Upgraded case version powered by a 18650 Li-ion battery cell for longer battery life and easy battery replacement.
