Remote

The Remote app lets you create a custom button panel and bind each button to a capture file for one-touch playback.

Remote files (.REM) are stored in the REMOTES/ folder on the SD card. New remotes are automatically named REMOTE_0001.REM, REMOTE_0002.REM, etc.

Main UI

• Title — The top line shows the remote's name. Select it to rename it (max 30 characters).
• Buttons — Up to 12 customizable buttons arranged in a 4×3 grid. Select a button to transmit its capture file. Select the same button again to stop. Long-press Select to open the button edit screen.
• Waterfall — A small waterfall display shown between the button grid and the bottom bar while transmitting.
• Gain / Amp — Transmitter gain and amplifier control (via the TX bar at the bottom). The indicator color reflects transmitter power.
• Loop — When checked, continuously retransmits the capture until stopped.
• Filename — Shows the current remote filename (without extension). Select it to rename the file.
• Add button (+ icon) — Adds a new empty button to the grid. New buttons open in edit mode the first time they are selected.
• New remote (new-file icon) — Saves the current remote and starts a new empty one.
• Open remote (folder icon) — Saves the current remote and opens an existing .REM file from the REMOTES/ folder.

Remotes are automatically saved when the app exits.

Button Edit UI

• Name — The text label shown on the button (max 30 characters).
• Path — Select to pick a capture file (.C16 / .C8) from the CAPTURES/ folder.
• Freq — The center frequency to transmit on. Defaults to the capture file's metadata frequency if a .met file is found, otherwise falls back to the current TX frequency.
• Rate — The sample rate read from the capture file's metadata, or 500 ksps if no metadata is found. Display only — cannot be changed here.
• Icon — Selects an icon to show on the button (index 0 = no icon; indices 1–24 select from the available icon set).
• FG Color — Foreground (text/icon) color index (0–20).
• BG Color — Background color index (0–20).
• Preview — Live preview of the button as it will appear in the main UI.
• Trash (red) — Deletes this button after a confirmation prompt and returns to the main screen.
• Done — Saves changes and returns to the main screen.

Available colors (index → name)

Index	Color	Index	Color	Index	Color
0	Black	7	Orange	14	Dark orange
1	White	8	Yellow	15	Dark yellow
2	Darker grey	9	Green	16	Dark green
3	Dark grey	10	Blue	17	Dark blue
4	Grey	11	Cyan	18	Dark cyan
5	Light grey	12	Magenta	19	Dark magenta
6	Red	13	Dark red	20	Purple

Technical details

Parameter	Value
Baseband bandwidth	2.5 MHz
Sample rate	From capture metadata (or 500 ksps fallback)
Metadata fallback frequency	Current TX frequency
Settings file	tx_remote.ini

REM file format

Remote files are plain text and can be edited in any text editor. Empty lines and lines beginning with # are ignored.

• The first non-ignored line is the remote title.
• Each subsequent line (up to 12) defines one button in this comma-separated format:

capture_path,button_name,icon_index,bg_color_index,fg_color_index,center_frequency_hz,sample_rate_sps

Example:

My Remote
CAPTURES/door.C16,Door,6,3,1,433920000,500000
CAPTURES/lock.C16,Lock,0,17,1,433920000,500000

The order of buttons on screen matches the order of lines in the file, so buttons can be rearranged by reordering lines.

Tips

• Use the IQ Trim utility to trim silence from captures so they start transmitting instantly.
• If a .txt metadata file exists alongside a capture, its frequency and sample rate are used automatically.
• Button positions can be rearranged by editing the .REM file directly.