-
-
Notifications
You must be signed in to change notification settings - Fork 914
Care
-
Do not pack the PortaPack with heavy or blunt objects. The LCD display is easy to crush, scratched and damaged. The touch screen glass is not smartphone glass, and is therefore a lot more fragile.
-
Keep the unit away from water and dont keep in a damp enviroment.
-
The RF input to the antenna is very sensitive to RF level. Do not overload or place in an environment that has high RF levels otherwise the front end amplifier will be damaged, this has happenend to a lot of people.
-
If transmitting make sure you have an Antenna or RF load conected to the Antenna connection of nominal 50 Ohms and has a VSWR less than 2:1.
-
Do not overtighten RF cables to the HackRF SMA connectors. If you tighten too much, the SMA connector can snap off the HackRF board.
-
Disconnect all cables and connectors before storing your PortaPack. Sideways force on plugs can loosen and damage PortaPack and HackRF connectors.
-
Do not change antennas with your HackRF powered up.
How to collaborate
Contributing Guidelines
Trusted contributors
How to ask questions correctly
- PortaPack Versions (which one to buy)
- Features
- HackRF Versions
-
Description of the hardware
- Enclosure/cases
- Repairs
- Mods
- Usage cautions
- First steps
- Firmware update procedure
- User interface
- Powering the PortaPack
-
Troubleshooting
- Won't boot
- Config Menu
- Firmware upgrade
- Diagnose firmware update in Windows
- Receive Quality Issues
- No TX/RX
- TX Carrier Only
- Dead Coin Cell Battery
- Factory Defaults
- SD card not recognized by PC with the SD-card over USB selected
- DFU overlay
- Full reset
- SolveBoard
- How to Format SDCard
- What if I don't like some of the apps
- 📥 Receivers
- 2-Tone-RX
- ACARS
- ADS-B
- AFSK
- AIS Boats
- Analog TV
- APRS RX
- Audio
- BLE RX
- Detector
- EPIRB RX
- ERT Meter
- Flex RX
- Radio
- Fox-Hunt
- FPV-Detect
- gfxEQ
- Level
- Meteor
- Morse RX
- NOAA
- NRF
- POCSAG
- ProtoView
- Radiosonde
- RTTY RX
- Scanner
- Search
- Signal Hunter
- SSTV RX
- SubCar
- SubGhzD
- Tetra RX
- Time Sink
- TPMS RX
- Weather
- WeFax
- VOR RX
- 📤 Transmitters
- 2-Tone-TX
- ADS-B(S) TX
- Adult Toys
- APRS TX
- BHT Xy/EP
- BLE TX
- BLESpam
- Burger Pager
- CVS Spam
- EPIRB TX
- Flex TX
- FlipperTX
- GPS Sim
- Hopper
- Jammer
- KeeLoq TX
- Key fob TX
- LGE Tool
- MDC-1200 TX
- Morse TX
- OOK
- OOK Brute
- OOK Editor
- P25 TX
- POCSAG TX
- RDS
- RTTY TX
- SAME TX
- Security+ TX
- Signal gen
- Soundboard
- Spectrum Painter
- SSTV
- TEDI/LCR
- TouchTunes
- TPMS TX
- VOR TX
- 🔄 Transceivers
- 🟡 Recon
- 🔴 Capture
▶️ Replay- 🖲️ Remote
- 🔍 Looking Glass
- 🛠️ Utilities
- 🎮 Games
- ⚙️ Settings
- 💻 HackRF Mode
-
Compilation of the firmware
- Compile on WSL with ninja
- How to compile on Windows faster with WSL 2
- Using Docker and Kitematic
- Docker command-line reference
- Using Buddyworks and other CI platforms
- Notes for Buddy.Works (and other CI platforms)
- Using ARM on Debian host
- All in one script for ARM on Debian host
- Compile on Arch based distro (exclude Asahi), or other weird distros
- Dev build versions
- Notes About ccache
- Create a custom map
- Code formatting
- PR process
- Description of the Structure
- Software Dev Guides
- Tools
- Research
- UI Screenshots
-
Maintaining
- Creating a prod/stable release (Maintainers only)
- Maintaining rules
- Development States Notes